This module assumes the use of software that issues CVs from the ADAT of the audio interface.Please note that we do not sell or support these software.
This module is ideal for modular control from a PC. You can convert it to an analog voltage when you use silent way, Max/MSP, etc. to issue a control voltage from the ADAT output of your audio interface. (
ES-6And the opposite is possible.)
In addition to clocks for synchronization, the Silent Way plug-in can generate a variety of signals, including CVs and triggers for quantized pitches, and complex LFO. In addition, if the latency correction of the audio interface is chitin, synchronization with the DAW is also guaranteed on a sample-by-sample basis, so the timing is also tight. By directly sending signals in this way, even with a PC, it is possible to control more accurate and wider than MIDI.
CV output method from PC
Voltage signals generated by silent way plug-ins and other software can be output from the audio interface, but some models cannot output CVs from analog output. Which audio interface is available?
This pagePlease see. MOTU is ok there are many things, but RME has quite a rose, such as headphones are only compatible. I check the operation with MOTU 828mk3 in our store.
If you use the audio interface that has been confirmed on the above page, you can use the signal from the analog output modularly without using ES-3. The analog output cable is recommended to use floating Ring Cable so that it does not damage the audio interface, so please ask for it.
However, when using analog output, there is a disadvantage such as crushing the output terminal of the audio, and the output value of the output voltage is slightly smaller. Therefore, in the case of an audio interface with ADAT, cv and audio can be output by ADAT, and es-3 converts it to analog, allowing for a larger voltage and up to eight signals.
Silent Way can be used with an audio interface with ES-3 and ADAT outputIs.
It can be recommended for hybrid style with pc and modular combination.
A description of each part pops up with a mouse over.
