Erica Synths Pico Voice is a synthesizer voice oscillator module with 8 synthesis algorithms in a 3HP body. The algorithm is as follows, switch by pressing the button.
LED Yellow-Car Plus Strong Algorithm
LED red-code algorithm algorithm
LED orange-wavetable algorithm
LED Green-Baseline Algorithm
LED light blue-pulse width modulation algorithm
LED Blue-Super Saw Algorithm
LED purple-wave fold algorithm
LED pink color: Harmonic algorithm
The sounds generated by these algorithms are pronounced as having a certain attack release time by inputting a gate to TRIGG. To get a continuous sound like an oscillator, turn PAR2 all the way to the right.
There are two parameters that can be adjusted for each algorithm, which are assigned to PAR1 and PAR2, respectively. As mentioned above, PAR2 controls the release time except for Car Plus Strong.
The control target selection (PAR1 / PAR2 / pitch) by CV, waveform selection by chord algorithm, etc. can be set from Config mode by pressing and holding the button. For more informationJapanese manualSee also
Pico Voice can track normally up to around C6, and at higher frequencies the tracking performance decreases. To maximize the effective tracking range, when controlling at 1V / Oct, send the 1V / Oct signal with the TUNE knob fully left.
