The 16-step CV gate sequencer.You can save to 16 patterns and call it.
Characteristics: Sequence length can be up to 16 steps CV output can be quarteable and selected from 9 scales Gate length can be set for each step Features a step off or merge with the next step Slide can be set by selecting a step Transportation possible Random replay function within the set scale Can set 5 replay modes 16 sequences of memory available, including all settings Gate length can be set to 8. CV range is 0-8V (8 octaves)
HOW TO USE
Sequencer-edit is two pushable encoders (STEP and VALUE)in the following actions. The "STEP" encoder on top changes the color each time you push it.When it is light, you can set the entire sequence of colors according to color.When not glowing, specify the step to be edited by turning it around, and set the specific value in the "VALUE" knob.
Setting the entire sequence
"STEP" encoder solid green Turn around the STEP encoder.Length of sequenceto be pushed and push it back at the time of the decision.If the sequence length is 1 to 8, the sequence length that is selected for the display is 1 to 8, and 9 is displayed as "1." and 16 is displayed with dots, as "1." and 16 are "8."
The "STEP" encoder is illuminated in yellow. Turn around the STEP encoder.Scaleto the user, and then push and make the decision.
1-Cromatic (12-tone floor)
2-Ionian (major scale)
3-Dorian
4-Major pentatonic
5-Minor pentatonic
6-Sharp Sound
7-Halltone
8-Mixolian
9-major blues
10-Minor Blues
The "STEP" encoder solid red Turn around the STEP encoder.Play modein the selected list.
Forward replay
Reverse Direction
Ping-Pong
Ping-pong (the step of the tail is repeated twice)
randomly
The "STEP" encoder blinks yellow rotate the STEP encoder into the sequenceOctave Rangeto the user.
Set By Step
STEP "STEP" EncoderWhen you're doing this, by turning the STEP encoder,steps to editto be specified and the specific value will be set in the "VALUE" knob.Each time the VALUE knob is pushed, the color varies, and the different color sets of the parameters are different, and so on.
---- "Value" encoder solid green for the step selected by the VALUE encodermusical scaleto the user.Sharp is displayed with a dot, like a "C."
---- "Value" encoder illuminated in red for the step selected by the VALUE encoderGateto be set to the ON/OFF and the length.The length can be set in eight stages, the shortest gate OFF, the maximum gate length, and the next step and gate.
The ---- "Value" encoder is illuminated in yellow for the step selected by the VALUE encoderSlidesets ON/OFF.
Other operations
Transspors: While the sequence is running, you can press the VALUE encoder and turn the STEP encoder to protect the entire pitch of the sequence, while keeping the entire pitch of the sequence.After leaving the VALUE encoder, the pitch reverts to the original, but you can hold it when you press the STEP encoder during the transposing.
The Randomyds Pressing the "RND" button will randomize the sequence within the set scale and octave range.
Master Slide Settings You can change the slide settings across the steps by pressing the "RND" button and then turning the STEP encoder.You can select the master slide OFF (the slide set by step remains valid)/random slide/all steps on the slide ON.
Pattern save Press the "L/S" button twice to blink the STEP encoder, then turn the encoder and select the save destination, then push the encoder to confirm the save.
Paternroad If you press the "L/S" button once, the STEP encoder blinks green, then you will turn the encoder into the pattern and push the encoder to confirm the load.