IntellijelはLinixをデザインする
生産終了しました
最終アウトプットからCVのシグナル処理にまで使用できる、6チャンネルのフレキシブルなVCAミキサー
Format: Eurorack
Width: 16HP
Depth: 28mm
Current: 88mA@+12V, 84mA@-12V
ジャック&ノブズ
バイアスノブ
It is a knob for opening the VCA in a manual: turning the leftmost when there is no CV input will result in a signal from the VCA being 0.
LEDS
It is an LED that shows the sign and clipping of the 6-channel output signal that becomes a master when using as a mixer; the output signal is distorted when the clip LED is shining.
出席者
Attenator (Amount) against CV of VCA
着信CV用LED
It is an LED that indicates the signal state of the CV inputs for each channel.
CV
It is a CV input for each VCA channel.
信号
It is a signal input for each VCA channel.
信号アウト
It is a signal output for each VCA channel.
The output of the first five VCA channels is internally connected to the back-stage mix stage, with the VCA of the mix stage being the sixth VCA (SUM OUTPUT).
However, patched to the output of each VCA channel, the channel is cut off from the mix stage,SUM OUT no longer mixes.When patched into all five channel outputs, SUM OUT's VCA can also be used as a sole VCA.
When you adjust the cursor to the screen, the roles of each part appear in the pop-up.
音楽家
Linix is a mixer and VCA module equipped with six high quality 2164 liner VCAs and with skillful routing; of course both of CV audio are processable.The output of the first five VCA channels is internally connected to the mix stages of the rear stage, with the mix stage being the sixth VCA (SUM OUT). Mixed signals can also be controlled with the sixth channel VCA; however, patched to the output of each VCA channel, the channel is cut off from the mix stage and is scattered by the swath of the channel.SUM OUT no longer mixes.This specification allows each channel to be a channel of one of the mixers, or a single VCA oftwo-street useThis is possible: when patched into all five channel outputs, the VCA of SUM OUT can also be used as the sixth VCA of its own.
It is very understandable because it also features LEDs showing the CV level of each channel, LEDs showing the +/- of the master output, and LEDs showing the master's clipping.
There's a 12-pin header on the back, Mutamix You can keep it internally connected as an input signal of .