Steady State Fate Stereo Dipole (Black and Gold)

MUSICAL FEATURES

 Stereo Dipole is a VCF module that can process sound by combining four multi-mode filters. The Drive controls in front of the filters allow you to create clean tones with a stunning vintage overdrive sound, depending on how the filters are combined for stereo effects, complex fading, formants and acid. You can produce various sounds such as bass.

 The Stereo Dipole has independent A and B channels, and each channel has two 2Pole (12dB / Oct) multi-mode filters that can be switched between high-pass, band-pass, and low-pass with a switch (4 channels for 2 channels). One) is installed. These two filters can process the input signal serially or in parallel, and the output can be taken out from the Dipole-A / B jack. (The signal after only one filter in each channel passes through the Pole-A / B jack. Can be taken out). The cutoff frequency of the second filter in the channel is determined by adding the frequency specified by SPREAD-A to the main cutoff frequency (FREQ-A for CH A). Spread moves in the range of 0, ± 5 octaves in the middle. For example, in CH A, the first filter is HP, the second is LP, the serial connection is made, and SPREAD is set to the full right, the band pass filter that passes the sound in the band from FREQ-A to about 5 octaves It becomes.

 In addition to using CH A / B independently, there is also a rich set of functions that make it easier to create a unique stereo effect by processing the mono signal differently for both A / B and setting each to L / R. I am. When not patched to B's input, the input signal to A will be routed to B as is. The Stereo Freq knob / jack and Stereo Res knob / jack are located in the center and can control the cutoff or resonance of both CH A and B simultaneously. These knobs and jacks are bipolar and add to the Freq / Res settings for each channel.

 The CVin jack of each channel, stereo frequency and resonance control is equipped with an attenuator / attenuator, and V / Oct and Spread control without them can all be controlled by temperature compensated 1V / Oct.

DEMO