Industrial Music Electronics Bionic Lester mkIII

MUSICAL FEATURES

Bionic Lester is a two-channel, two-pole state-variable digital filter with a unique aggressive character. Of the filterMode changes continuously with knobs and CVsIt changes from low pass to band pass to high pass to notch to all pass / com.Digital VCAControls the amount of gain and distortion applied to the filter input stage. Each filter has inputs and outputs, and a Mix output that adjusts and outputs the two balances. With the comb filter, it is also possible to obtain effects close to delay, chorus, and fading.

Each filter has three CV inputs. The first CV input is for modulating the cutoff frequency, and CV2 and CV3 are for cutoff, resonance, mode, or gain.Assignableis. Assign it to gain and the input will be controlled by the digital VCA. Assignment ispresetAnd, like other Industrial Music Electronics mk3 modules, use CVs between the eight presets.Morphableis.

Each filter in Bionic Lester works independently by default, but you can press the buttonLink modeYou can switch control and signal routing by entering, saving you the hassle of patching. Set the Link mode from the menu, and the following settings are possible

• A CTL: The cutoff setting changes, A is controlled by the filter A cutoff as it is, but B is the cutoff realized by adding the filter A's cutoff to its own cutoff value. In this way, the cutoff of A is also controlled by the cutoff of B.
• SERIES: The signal input to filter B is ignored and the output from filter A is routed to input. A and B controls are independent and operate as a serial filter with distortion in the middle
• 4 Pole: Signal routing is the same as SERIES, but A controls B also. As a result, two 2-pole filters with the same parameters are connected serially, and a 4-pole filter signal is output from output B. Output A has a 2-pole output, and the Mix output has a 3-pole output when the balance is in the middle.
• STEREO: Filter A / B input and output are independent, but A control also controls B. By using A and B as stereo LR outputs, it becomes a filter for stereo input and output.

In addition to CV assignments, link settings can also be saved to presets. Other preset settings can be accessed by holding down the encoder and pressing the button next to the display.