Spherical Wavetable Navigator (SWN) is a 6-channel polyphoonic synthesizer voice that makes it easy to create polyphonic melodies, code, and rich texture sound from a slow, morphing drones.SWNSix VCOcan be loaded individually to control pitch, volume, and wave control.Nothing.Six LFOand it can be used as modulation and enveloping, so it can be used as an envelope,Polyphonic sequence soundin the following table.Each channel can be used not only as a simple VCO, but also as a syntheVoice, and it can also trigger six buttons listed on the top, an internal LFO, and a trigger for detecting a V/Oct pitch change.
Every knob is a pushable endless knob, and by pressing it, it controls the secondary function written at the caption of a gold back.You can also press the channel button and turn the knob and set the parameters for each channel.Such unified interfaces and LEDs provide a quick and easy way to control many parameters without a menu by displaying pitch or tilde information.
SWNWavetableSo, call the obrinator-the waveform.You can also sign different waves for each VCO.The wave table is the form of a virtual sphere, with the distance (Depth) from the center (Depth), Latitude (Latitude), and longitude to specify the position in the sphere, and the waveforms that are in memory are called.The waveform is smooth and morphing, and if you keep the knob again, you will go back to the waveform and make the same morphing as much as possible.The SWN will have a 12-wave table when it is shipped.your own wave tablesIt is also easy to create.The wave table can be made from audio and body operations recorded in SWN, and it can be made using a free SphereEdit software running on a Mac, Linux, or Windows operating system. The output is output with an odd number of channels on the left, and even channels are printed to the right.In the case of monooutput, only the right output is to be patched to mix all channels.
* Firmware has been v2.1 since July 2019, and additional features include:For more information, see "How To Use".
Add a CV/Gate Mode that can be triggered by a gate for each voice
Add the ability to lock parameters for each channel
the addition of a single recording function in a waveform
Adding the sphere of export for the sphere
Switching code in Spread CV modifies the delimiting voltage to correspond to a black key's pitch CV
Demos
HOW TO USE
of a button or knob combo operation
SWN has many operations due to the combination of buttons and knobs, but it follows the following rules:
When the knob of a parameter is turned around by itself, the parameter is changed in all six Osirators or LFO.If you want to set the VCO or LFO parameters for a particular channel, press the corresponding mute button and manipulate the knob of the parameter.Multi-channel multi-channel buttons are pressed while holding multiple mute buttons
It is possible to lock each channel so that the voice or LFO is not affected by the knob of the parameter.Firmware v2).To make a lock, press "Fine" and press the mute button on the channel you want to lock.If you lock it, almost all VCO/LFO parameters will be fixed for that channel and will not reflect the movement of the knobs.Only 1V/Oct Jack, Slider and Mute buttons are not locked, but they do the same.Even on a locked channel, you can adjust the individual parameters by holding the mute button.
To control the parameters of the character in the gold background, hold the knob while holding the knob.
To control only the small amount of parameters, press Fine and rotate the parameter knob.Valid for each channel operation
Press the Preset button and then press the corresponding button to reset the VCO or LFO parameters.
For more information on combo operations, the description of the following parts:manualAlso see the button combo chart on the final page.
Pitch control
All of the following pitch-related parameters can be set independently or independently for each channel.If you want to set it for each channel, press and hold (or hold) the knob of the corresponding parameters by holding the button corresponding to that channel.
Octave: the channel pitch is raised in octaves.
Transpose (Transpose): cut down the pitch of the channel in half-tone units
Fine + Transpose: cut down the pitch of the channel in a small unit
Scale for scale: Selects scaled scaled scales: Major, Minor, Chromatic, no Quontaise
Spread (Spread): The relative pitch between the channels is released to produce the following code:
1: No transposition 2-4: Fifths 5-7: Major sho 8-10: Minor 11-13: Major sixths 14-16: Major sevenths 17: Major League chord 18: Major Eleventh chord 19-21: Minor-sixths 22-24: Minor 's 25: Minor chord 26: Minor eleventh chord
Feynspread (Fine + Spread): Slow down the relative pitch between channels in small units (useful for unison, etc.)
1V/oct Jack: One V/Oct input for the musical scale control of each channel
Transpose Jack (Transpose): Global 1V/Oct input
Spread CV jack: Global spread CV controls for code selection
The exterior rings of the LED also show the pitch state that reflects the Transpose and Spread for each VCO by pressing the Octave knob and pressing Transpose knob.
Press Preset and press Octave to reset the octave, press Preset, and Transpose to reset Transpose and Spread, press Preset and Fine, and then press Transpose to reset Fyne Tuning.
LFO/envelope control
All LFO-related parameters can be set independently for channels, or independently for each channel.If you want to set it for each channel, press and hold (or hold) the knob of the corresponding parameters by holding the button corresponding to that channel.
LFO output jack: Each channel has its own LFO/envelope output jack.It is possible to control the volume of the VCO in the channel by pressing the LFO - > VCA button instead of a patch.
LFO Speed (LFO Speed): The tempo control for each LFO.It can be synchronized to one or more times (Div/Mult), such as in the main clock.If you don't want to synchronize, you can use an LFO speed fine control.It also operates in LFO Audio Oral, where speed control is adjusted in half-syllable units.
LFO tilde (LFO Shape): Select from 25 LFO waveforms
LFO Gain: Controls the size of LFOs.It's also useful as an uteneta during self-patch.
LFO position phase (Phase): Tailor the LFO topology (when the waveform starts)
LFO Type Button: Select from triggers, gates, wobsheses (wavy chosen by LFO Shape)
LFO CV Jack: LFO speed control
External clock jack: Master-locked Jack for LFO synchronization
You can press a Preset and press LFO Speed to reset the waveform by pressing the Preset and pressing the LFO Shape.Press the Preset and then press both LFO Speed/Shape to reset the LFO full.You can also toggle LFO Speed and LFO Shape at the same time to toggle between a pattern of 6LFO-aligned patterns and a 60-degree pattern.
Volume control
The volume of each VCO can be controlled by sliders or mute buttons.The slider state is not stored in the preset, but the mute button state is stored in the preset.LFO→VCA ButtonIt is also possible to create and save a complex polyphoonic sequence.Keyboard mode and LFO→VCA mode by pressing and manipulating mute buttons.for each channelIt is configurable.
Slider: Each channel level can be controlled by a slider.
Mute button: Mute can be muted on each channel button
Key Buttons: In keyboard mode, in Notre mode, the mute button triggers the envelope of the corresponding channel, and is used to make a sound.
VCA Input Jack: The jack's role can be switched by the switch to control the level of each channel with the 1V/oct jack.
LFO - > VCA Button: Then, the LFO is patched internally for each VCO's level control.It can also be set for each individual channel.
Also, when you press the LFO→VCA and LFO shape buttons at the same time, the mute button push changes, switching back to note mode, keyboard mode, CV/Gate mode (firmware v2 and later), and the mute mode of the original mute button.
Note mode: In Notre mode, the modulation of the VCA by LFO will no longer be effective, and only VCO with 1V/Oct signals, Transpose, or Spread will automatically trigger the sound.You can also trigger the sound of each VCO by pressing the mute button corresponding to it.
Keyboard mode: Mute button triggers each VCO in the same way as in note mode, except that the button is pressed without usthenine and it is an AD envelope, and if the pitch changes, the envelope is not triggered automatically.
CV/Gate mode (firmware v2 and later): In this mode, each VCO can be triggered externally independently.The envelope will reflect the LFO of the corresponding channel.In the gate input for each voice, the jack of Waveform In, Dispertion CV, etc. is used to change its role as follows:Also, the Spread CV jack is the gate input for the entire voice.
* 1V/Oct The gate input of a voice that is not cabled to jack will be invalid and will act as the input.For example, it is possible to control Depth with CV when it is not patched 1V/Oct of the C crater.
Wavetable control
All wavy-table-related parameters can be set independently or independently for each channel.If you want to set it for each channel, press the button corresponding to that channel (or multi-select), then turn (or hold) the knob of the parameter.
Browse is: It scans the wavetable sphere with a zigzag, and recovers the waveforms in the table, morphing morphing.
Depth: Moves the Depth coordinates in the wave table.
Latitude: Move the latitudes to move in the wave table.
Longitude (longitude): Move the longitude to moff in the wave table.
Sphere (Sphere): Select a wave table from a 12 factory wave table, or from 108 Utherwave tables
Distributed (Dispersion): Control the distribution in the wave table of the waveform to which each channel calls
Distributed Pattern (Dispersion Pattern): Select the pattern for the variance
Waves Table Spread (WT Spread): Assigns each channel to a different wave table.
It also resets the wave table by pressing Preset and pressing Depth and Latitude.
Preset
You can save all settings except the state slider and the 1Voct/VCA switch state, and then call it later.
Save Preset (s): Saves the current SWN state.Turn the Preset around to select the desired slot, press the Preset long and turn red, then press Preset again to confirm save.
Call Preset (Load Preset): Save the preset you have saved.Turn the Preset to select the desired slot, press Preset to green, then press Preset again to confirm the call
Clear Preset clear: Clears a saved preset.Turn the Preset around, select the desired slot, press Preset to continue and turn the LED quickly, then push the Preset again to confirm the clear.
Ando (Undo Preset), a preset: The preset operation, such as clearing or saving, can be undone only once.Press Fine and press Preset
Sphere-recording
There is a special mode in which a sound is recorded for the creation of spherical wave tables used in SWN, where each control plays a different role.Press the three knobs at the same time: Depth, Latitude, Longitude.The LFO→VCA button is red, the trigger, gate, and the websheper button glees green, and the recording mode is entered.During the recording, pulses from the LFO jack are printed and useful for a variety of synchronization.
Recording Method
Waveform In Jack: Enter the audio that you want to weave here.Gains are adjusted automatically.You can also enter a line level sound
Recording: Start a sound recording from Waveform in order by pressing the LFO→VCA button.The recording takes approximately 2.5 seconds to build 27 waveforms from an audio segment of this 2.5 seconds.Also,Firmware v2You can also record a single wavy form by pressing Fine and then using LFO→VCA to record.Once you finish the recording, you can turn the Browse slightly to the right, and you can record a single wavy, and then you can record the waveforms while adjusting for each one.
Monitoring: It is also possible to monitor the input.press the green button
Test Tone: Test tones are output for tuning.You can press Fine and push the green button to monitor the 86.13Hz test tone.The sound of the sound can be taken into account by matching the audio recording to this pitch.
editing after recording
After recording, edit the audio to actually store it in the wavetable.Before you save, you can do the following:
Weave Form Shift: Scans a point in the recording material for a tilde selection.Push the central knob off.
Webb Form Spread: Adjust the waveform pattern from the recording material. Control where the waveform is picked up from the recorded audio by pressing the Transpose and turning the waveform.
Weeb Form Stretch:Stretch the waveform and adjust the pitch in octaves.Press Octave and rotate the waveform browser-nob.
In addition, you can press the mute button and then turn the waveform in the bottom middle of the waveform to tilt the selected epochs into the waveform.Efect is from the leftmost mute button,
Wave FoldereFect: a control that spaves sound material into a wave folder
Bit redaction, Ephecte: a control that fils with a bit redaction, etc., of sound recording material
Metall-Raiser Efect: it attaches a metallic redoubled sound to the waveform.
Lo Path Filter Effects: Sit the recording material into the raw path filter.
Gains/Nomise Effects: Adjust the Gains of the Recording Materials
Smooth Effects: you lose the sound of the waveform at the edge of the waveform.
in the following actions.
When you're done editing, save the wavetable sphere to a slot in the user-defined table. Turn the Preset knob, select the slot to record the wavetable, and then long press and hold the Preset knob until it turns red. Then, the save is confirmed by doing preset again.
In addition, when monitoring on in Sphia recording mode and pressing the center knob, the SWN output plays 27 waveforms in the wavetable eight times (a total of about 2.5 seconds). Recording and saving it on a recording device enables you to export and share spheres and edit them on your PC (Firmware v2 or laterwill be a function of the
For more information on Sphia RecordingQuick GuideVisit page 3
Firmware Update
SWN allows you to update firmware using audio files. The current firmware version is known in the state of the ring at SWN startup. The inner red ring is the major version, and the outer blue ring is the minor version number.
Firmware version display example
Unplug all cables connected to the SWN.
Turn off the module
Sound can be monitored from right output
Set the volume of the firmware file playback device to 100% and set it to no other sound.
Press and hold the waveform browse knob in the middle of the bottom to turn on the module. After a while, the mute button on The A CH will blink green when the browse knob is turned on.
Start playing the firmware audio file. Slider LED should be animated
If the update is successful, the LED ring will glow blue or green, and the mute button will flash blue and green. If it fails, the monitoring sound will not be heard, and one of the buttons will turn red. Move the file back to the beginning, check the cable connection, volume, and so on, and then press the mute button on CH A. Blinks green and waits for firmware audio file again, so it starts playing
After the update is successful, press the browse knob to restart for normal operation with the new firmware
* 1V/Oct The gate input of a voice that is not cabled to jack will be invalid and will act as the input.For example, it is possible to control Depth with CV when it is not patched 1V/Oct of the C crater.