XAOC Devices TIRANA II

TIRANA II is compactChain possibleA 4 step gate / CV sequencer. It has Direction and Reset inputs, modulates the melody with the Transpose input,Step repeat functionAndRatchet function、Clock divideIt has functions such as, and creates a variety of sequences from few steps.
 

Repeat / ratchet function

 Repeat is a function that stops at the same step for a specified number of times, and outputs a gate every clock when the gate is ON. Ratchet is a function that only one clock stays in one step, but repeatedly hits the gate a specified number of times during one clock.

 To specify these, first press and hold the button for the step you want to specify a repeat or ratchet, release, and then

• Repeat: Press the step button corresponding to the number of times (if repeat three times, step 3 button)
• Ratchet: Long press the step button corresponding to the number of times

 Please.
 

Clock division setting

 The external clock can be divided and used as the clock for the sequence.

• / 2 divide, press and hold button 1 + 2
• Long press button 1 + 2 + 3 for divide of / 3
• For a / 4 divide, press and hold 1-4

 is
 

Trigger / gate switching

 By pressing and holding buttons 1 and 4, the output from GATE OUT can be switched by trigger or gate. When a gate is selected, the gate length is the same as the gate length of the input clock.
 

Adjust reset timing

 In a sequencer, if a reset signal is input before the clock signal, it may start from step 2 when resetting. Therefore, Tirana II can add latency to the reset signal. To set the latency, turn on the power while pressing button 1,

• Latency = 0.35 ms
• Latency = 0.7 ms
• Latency = 1.4 ms (default)
• Latency = 2.8 ms

 Press any of to select