Michigan Synth Works SY0.5 (Silver)

SY0.5 is an analog drum module that reproduces pearl drum synthesizer name syncussion1 voice circuits as faithfully as possible and adds modular features. Sound that takes advantage of snappy envelope and analog texture, a variety of oscillator modes,Velocity function that dynamically reacts to trigger sizeAnd the features. And the functionof those original machines intact, in addition to the pitchCV control in decay and filter, oscillator modehas been added. Physical control by the slider is also alive and well while changing to a compact specification.

The sy0.5 sound source consists of two analog VCO and a noise oscillator. You can create various oscillator sounds by changing their routing and configuration (oscillator mode). The mode is switched with the top two buttons.

Each mode is as follows

• A-1VCO mode: Sound using one VCO
• B-FM mode: Metallic sound with one VCO and another vco frequency at high speed
• C-2VCO mode:Sound mixed with two VCO
• D-Sweep Mode:Modes with sweeps added in addition to THE SWEEP control
• FM mode with E-noise:Fm sound mixed with noise. It's also a different sound than normal FM mode
• F-Noise Mode:Noise oscillator-only sound

Each control is as follows

• Mode switch button: Toggles oscillator mode each time you press it. The mode can be CV controlled from the MODE input. In addition, if you press and hold two switching buttons for three seconds, the role of the MODE input changes, and it becomes a gate input to sequence the mode one by one.
• SWEEP: Modulat the oscillator pitch with a different envelope than the VCA. Use the SWEEP slider to set the size of the modulation and adjust the decay speed of the envelope in a pot connected by a line. The switch next to it also switches the direction of the envelope to the pitch rise/down.
• TUNE: Controls the pitch and filter cutoff of two VCOes. CV control is possible with PITCH input
• DECAY: Adjusts the decay of the VCA envelope. CV control is possible from DECAY input
• WIDTH: Controls the cutoff of the filter. CV control is possible from FILTER input
• Lfo: The strength of the LFO on the pitch is adjusted with the slider, and the speed of the LFO is adjusted with the pot connected by a line. The switch to the left switches the LFO waveform in a square or triangle.
• S/H ON/OFF: When the middle switch is on, a random sample and hold signal synchronized with the Speed of the LFO is pitched.