Make Noise Skiff

It is the case with the 104HP power supply made in Make Noise. It is the form of the type called skiff which it is thin and intends to put it on a desktop, and was designed. It was developed as the case which is エルゴノミック for controllers such as Rene or Pressure Points at first, but is the design which turned to build up a small modular system. When it is switched on, the Make Noise logo of the side shines.

In addition, there is the following characteristic.

• I arrive and am available immediately. I fit a module in the power supply in a right direction and I switch it on if I do a screw end and will do patching.
• Black powder coating is made by given aluminum
• 40 sliding square nuts are fitted in the rail, and 40 black M2 .5 screws corresponding to it are attached
• A switch is mounted by the side, and there is 2.5mm Jack for power supply adapters
• The logo that light displays power supply ON
• The 5V power supply is supplied, too
• Use possible maximum current 1.2A@12V,1A@-12V, 1A@5V
• The power supply bus which is compatible with a euro rack
• It is with the AC adapter which is available in Japan
• Depth of the modules which I can install is 2.56 inches on a bus board at 2 inches (51mm), the point except it (65mm).
• The size 21.5 "(546mm) X 5.14" (130.5mm) X 2.75 "(69.8mm)
• The weight is 4.45 lbs(2kg) in the state that I do not put a module.