Klavis Technologies Twin Waves
¥4,900
(税抜 ¥4,455)
-12Vレールの電流を+5Vに変換するコンバーター
MUSICAL FEATURES
Klavis Twin Waves has two independently algorithm selectable VCOs (or LFOs) on 8HPUltra-compact dual oscillatoris. In each oscillator, a variety of algorithms prepared for each VCO / LFO can be selected by pushing, rotating, and pushing the rotary encoder. The algorithm is also shown on the display. The rotary encoder is also used to control algorithm-specific parameters.
As a VCO, you can quickly create two unique sounds that usually take time and space, such as sync and detune sounds and selectable FM / AM options, from basic sine waves and pulse sounds with the smallest patch. You. In LFOClock synchronization(Or its Div / Mult)Random waveformCan also be output.
In terms of operability, Twin Waves has been carefully designed to take advantage of the digital strength to ensure comfortable operability in the smallest space. Because OSC1 and 2 share knob and button controls, the knob position and the actual pitch value may deviate, in which case the upper right LED does not light and the knob passes the actual pitch position Until the pitch changes. When the knob reaches the actual pitch position, the LED will light up, a message will appear on the screen, and the knob will control the pitch. In LFO mode, the Fine pitch knob sets the output LFOAttenuatorIt is also useful when applying modulation from the OSC2 LFO to the OSC1 VCO.QuantizerIs also installed. In the future, the firmware will be updated to make the oscillator even more fulfilling.
Main features (as of firmware 1.20)
As a VCO, you can quickly create two unique sounds that usually take time and space, such as sync and detune sounds and selectable FM / AM options, from basic sine waves and pulse sounds with the smallest patch. You. In LFOClock synchronization(Or its Div / Mult)Random waveformCan also be output.
In terms of operability, Twin Waves has been carefully designed to take advantage of the digital strength to ensure comfortable operability in the smallest space. Because OSC1 and 2 share knob and button controls, the knob position and the actual pitch value may deviate, in which case the upper right LED does not light and the knob passes the actual pitch position Until the pitch changes. When the knob reaches the actual pitch position, the LED will light up, a message will appear on the screen, and the knob will control the pitch. In LFO mode, the Fine pitch knob sets the output LFOAttenuatorIt is also useful when applying modulation from the OSC2 LFO to the OSC1 VCO.QuantizerIs also installed. In the future, the firmware will be updated to make the oscillator even more fulfilling.
Main features (as of firmware 1.20)
- Two oscillators can select VCO or LFO independently
- 1V / Oct tracking (VCO) over 10 octaves
- Sub-octave output (VCO)
- Linear FM at audio rate possible (VCO)
- Hard sync (reset), soft sync (reverse) possible (VCO)
- Various scales can be selected from the Quantizer option (refer to the manual for specific scales) (VCO)
- Clock synchronization (divide and multiply possible) (LFO)
- Output level control with Fine knob (LFO)
- Display function by LED dot display
- The settings are saved automatically and will be recalled automatically at the next power-on
- Firmware can be loaded with audio
Algorithms
VCO Algorithms
LFO Algorithms
Firmware Update
In Twin Waves, firmware can be updated by pouring audio into the module. The current version can be confirmed by pressing the OSC2 button and the SYNC button at the same time. The latest firmware isManufacturer PagePlease check below and download. The latest firmware version is 1.20 as of October 2017. The update method is as follows- Power off Twin Waves
- Patch the output of the audio playback device and the FM / AM input of Twin Waves
- Prepare for audio playback. This is the file that plays the Wav file in the downloaded Zip file.
- Set the playback volume to about 2/3
- Turn on Twin Waves while holding down the Osc2 and Sync buttons
- The green and blue LEDs will flash and will wait for update
- Start playing audio
- When the update is successful, the green LED will be on, the blue LED will flash, and the dots on the display will indicate the progress of the update
- If the update is successful, a success message will appear on the display, press the encoder to return to normal mode
- If the sound is too low, the red LED will be on and the two blue LEDs will flash. Adjust the level, press the encoder and the green LED will flash, so please play the file again from the beginning
- If the update failed due to too loud or other reasons, restart the above process from the beginning