Intellijel Designs 7U Performance Case (104HP)
¥139,900
(税抜 ¥127,182)
モジュラーでのパフォーマンス性を高める機能満載の蓋・電源つき7U・104HPケース
※You cannot install modules in the 1U "TILE" format manufactured by Synthrotek or Pulp Logic in this 1U part.Use only modules in 1U format advocated by Intellijel. For intellijel 1U format size specifications, seeHerefor more information.
※There is the case that a small wound and the scrape mark associated with the production are attached to the case of this place around the lid part.
※There is the case that a small wound and the scrape mark associated with the production are attached to the case of this place around the lid part.
MUSICAL FEATURES
It is a case with a power lid of 104HP with two 3U space and one stage of 1U space at the top. Various devices have been made to improve modular performance. Comes with an AC adapter in addition to the lid.
- 1U space can be installed with a 1U-Intellijel standard module centered on utility systems. The power supply is the same as the 3U module.
- Rail adopts M3 bar nut
- Robust plastic carry handle
- With an add-on-treated aluminum lid, it can be installed with a patch
- The folding leg allows you to place a two-step slope. It is also possible to put it flat, of course.
- Accessory slot is attached to the upper side and the bottom, and the joint sold separately can be installed.
- Audio I/O 1UAndStereo Line Out 1U、Pedal I/O 1UEquipped with a 1/4 inch audio jack available with the rear panel (upper side). Audio jack part has become a new specification from the sales minutes after summer 2019. For more information, seeHerefor more information.
- uMIDI 1UMidi In, Thru, and USB terminals connected with ribbon cables are mounted on the rear panel (upper side). There is also a MIDI Out terminal, which may be used in the future
- DC jack and power switch for AC adapter connection are installed on the rear panel (upper side)
- The weight is 4.3kg with lid and 4.7kg with AC adapter.
- The module depth can be installed up to 70mm and 53mm on the bus board. The bus board is mounted on the bottom of the lower side of the 3U, so the upper side is all 70mm deep.
- The power bus board is TPS80WMAX and the current limit is 3A@12V, 3A@-12V, and 1.5A@5V. 28 modules can be connected.
- AC adapter included for Japan