Skip to content
ブラックフライデーセールがスタート！さらに BF10クーポンで在庫品が10%オフ(一部対象外)
15,000円以上国内送料無料 | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
ブラックフライデーセールがスタート！さらに BF10クーポンで在庫品が10%オフ(一部対象外)
15,000円以上国内送料無料 | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details

MUSICAL FEATURES

Japanese manualThere is.

This is a compact 16-step 4CH trigger sequencer / clock generator module.

 Patterns on the webeditorProgram using. The step length can be set from 1 to 16 for each channel.

Features and usage:
  • Operable in synchronization with internal clock or external clock. When the switch is in the "IN" position, the CLK jack becomes an input and accepts an external clock. When the switch is in the "OUT" position, the CLK jack is the output jack for the internal clock.
  • When the encoder is green, it is in pattern play mode. Turn the encoder to change the speed of the internal clock
  • Shuffle available. Push the encoder to make it yellow and change the amount of shuffle
  • 4 channel trigger output. Each channel can be edited freely with a web editor
  • The web editor also allows you to change the length of steps for each channel, creating polyrhythm
  • Edit the pattern with a web-based editor and save. Patch the audio output of the PC or mobile running the web editor to the CLK jack (make sure the switch is set to "IN") and upload the pattern to the module
  • Up to eight patterns can be stored in memory. Press the LOAD button and turn the encoder to select a pattern. Patterns 1 to 4 are indicated by the channel LED lighting. Patterns 5-8 are indicated by flashing channel LEDs

 

Using a web-based editor

  • http://www.ericasynths.lv/triggergenGo to.
  • Select the pattern length for each channel and click the step you want to turn on the trigger.
  • Make sure the module switch is in the "IN" position. If you hold down the encoder for 2 seconds, it will flash red and will be in the pattern upload standby state.
  • Once the pattern is determined, patch the audio output of the device running the web editor (smartphone, laptop, etc.) to the "CLK" input of the module.
  • From the drop-down list next to the "UPLOAD" button in the editor, select the pattern number to save to. Click the "UPLOAD" button. Upload is successful once the module encoder flashes green once.
  • Press the encoder once to return to the normal state, press the LOAD button and select the pattern you just saved, the pattern you just programmed will be recalled
TOP
x