Skip to content
年末のミニセール開催中！
15,000円以上国内送料無料 | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
年末のミニセール開催中！
15,000円以上国内送料無料 | FREE DHL SHIPPING WORLDWIDE FOR ORDERS 50K+ yen : Details
Intellijel Designs uMIDI

Intellijel Designs uMIDI

Intellijel Designs
¥39,900 (税抜 ¥36,273)
USBも対応、コンパクトで使いやすいMIDI-アナログコンバーターモジュール
MIDI Converter

Format: Eurorack
Width: 6HP
Depth: 40mm
Current: 47mA@+12V, 3mA@-12V

Intellijelの最新のマニュアルやファームウェアについてはメーカーのサポートページも参照してください。

MUSICAL FEATURES

uMIDI is a MIDI-analog signal conversion module that provides the functionality needed to synchronize and control modular scan from computers, iOS devices, and MIDI hardware. Menu operation is not necessary, and it can be used easily with two buttons.

The upper section outputs associated with the clock, one is 1/16, and the second clock can output by setting the number of divisions. Run and Reset outputs are patched and used for the sequencer's corresponding inputs.

The lower section is equipped with one set of outputs needed to control single voice in MIDI.

Insert a MIDI or USB cable, learn the MIDI channel, and play all you have to do. When you press the LEARN button and then send something midi note, uMIDI will convert and output the MIDI notes for that channel. The LEARN button also remembers the current MIDI channel and clock split sit-down by pressing and holding, and automatically calls the setting on reboot.
 
  • High-speed ARM processor for low latency
  • MIDI input by DIN or USB
  • Two clock outputs, one clock-by-clock
  • Supports bends and portamentos, accurately output0-10V pitch signals
  • Gate and trigger signals can be output separately
  • Modulation wheel and CC output allow for further modulation
  • Firmware update able by USB
 
Mouse over to see a description of each part

Firmware Update

The steps for updating the firmware are as follows:
  1. Turn off the module and unplug all connected cables.
  2. Connect the USB cable to the computer from the back of the module.
  3. IntellijelPageOpen the updater downloaded from and select the module and version from the drop down.
  4. LEARNPress and hold the button to power the module back on.
  5. At the bottom of the updaterUpdateThe progress bar begins when you press the button, and when the message "Update completed successfully" appears at the end, the update is terminated.
  6. Reboot the modular will work with the new firmware

TOP
x