{"title":"Features","description":"","products":[{"product_id":"2hp-s-h-silver","title":"2hp S+H (Silver)","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThere are only 2 channels samples \u0026amp; hold at 2HP.\u003cbr\u003e  \u003c\/div\u003e","brand":"2HP","offers":[{"title":"Silver","offer_id":44251048771809,"sku":"2HPS+HSIL0031","price":15900.0,"currency_code":"JPY","in_stock":true},{"title":"Black","offer_id":44251048804577,"sku":"2HPS+HBLA0647","price":13900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/2hp_S_2BH_Cropped.jpg?v=1535361030"},{"product_id":"4ms-bus-stick-bare","title":"4ms Bus Stick (Bare)","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eFEATURES\u003c\/h3\u003e\n\u003ca href=\"\/en\/products\/10046\" target=\"main\"\u003eRow Power 30 \u003c\/a\u003eAnd\u003ca href=\"\/en\/products\/10047\" target=\"main\"\u003eRow Power 40 \u003c\/a\u003eAnd, it is a bus stick to connect with one attached ribbon cable, and to distribute power. It can be connected to up to 13 modules. You can have up to two in one Row Power. It can be pasted on to the case using the adhesive tape on the back.\u003cbr\u003e \u003cbr\u003e Dimensions: 200x30mm\u003cbr\u003e Maximum height: 0.53\" (1.4cm) from the case surface when pasted with adhesive tape","brand":"4ms","offers":[{"title":"Default Title","offer_id":13198799536197,"sku":"4MSBUSSTIBARE0042","price":6400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/4ms_Bus_Stick_Bare_web.jpg?v=1535421659"},{"product_id":"4ms-flying-bus-male","title":"4ms Flying Bus Male","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/10046\" target=\"main\"\u003eRow Power 30 \u003c\/a\u003eAnd\u003ca href=\"\/en\/products\/10047\" target=\"main\"\u003eRow Power 40 \u003c\/a\u003eAnd connect to the flying bus cable to distribute power. You can connect up to seven modules.\u003c\/p\u003e\n\u003cp\u003eIt is sold one by one.\u003c\/p\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":13198800027717,"sku":"4MSFLYBUSMALE0045","price":2600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/flying_bus_single_male.jpg?v=1574928044"},{"product_id":"4ms-quad-clock-distributer-expander-qcdexp","title":"4ms Quad Clock Distributer Expander (QCDEXP)","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003ca href=\"\/en\/products\/4ms-quad-clock-distributor-qcd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eQuad Clock Distributor (QCD)\u003c\/a\u003eThis is an expander connected with the attached 16pin ribbon cable.\u003cbr\u003e \u003cbr\u003e  The following functions are added by connecting this expander. \u003cul class=\"inExp\"\u003e\n\u003cli class=\"inExp\"\u003eINV OUT outputs a clock with the same tempo as the output of the QCD itself.\u003c\/li\u003e\n\u003cli class=\"inExp\"\u003eThe type of output signal from INV OUT can be switched with a switch, and the following modes can be selected. \u003cul\u003e\n\u003cli\u003eDelayed Trigger mode (switch left position) that outputs a trigger delayed from the QCD body from INV OUT\u003c\/li\u003e\n\u003cli\u003eInverted Gate mode (switch center position) which outputs a gate signal from the QCD body and outputs the inverted signal from INV OUT\u003c\/li\u003e\n\u003cli\u003eA trigger signal is output from the QCD body, and a double-speed shuffle trigger is output from the INV OUT Shuffle mode (switch right position)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"inExp\"\u003eControl knob for trigger delay time (in Delayed Trigger mode) and gate time (in Inverted Gate mode).\u003c\/li\u003e\n\u003cli class=\"inExp\"\u003eCV control of trigger delay time and gate time.\u003c\/li\u003e\n\u003cli class=\"inExp\"\u003eAttenuator of that CV\u003c\/li\u003e\n\u003cli class=\"inExp\"\u003eAttenuator of Div \/ Mult CV input of QCD\u003c\/li\u003e\n\u003cli class=\"inExp\"\u003eLED brightness can be adjusted from the front panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"image-map-wrapper\"\u003e  \u003cdiv id=\"image-map-pro-container\"\u003e\u003c\/div\u003e\n\u003cspan class=\"image-map-note\"\u003eExplanation of each part is displayed by mouse over\u003c\/span\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/LzeQt2HO3GM\" width=\"420\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":13198800584773,"sku":"4MSQUACLODIST0047","price":29900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/4ms_QCD_exp.jpg?v=1535421668"},{"product_id":"4ms-quad-clock-distributor-qcd","title":"4ms Quad Clock Distributor (QCD)","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cem\u003eControl the number of divisions and multiples of the clock with CV\u003c\/em\u003e4 channel clock divider \/ multiplier \/ generator If you use a CV, you can create patterns with a combination of clock-like rhythms, so it is ideal for drum sequences, and it is also possible to instantly create fill-ins with the Div \/ Mult knob.\u003cbr\u003e  \u003cbr\u003e  The module where the signal to the clock IN is internally connected after the next channel is also designed practically, and it is a simple but very useful module including the size and number of channels! QCD also\u003ca href=\"\/en\/products\/4ms-quad-clock-distributer-expander-qcdexp\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eQCD Expander\u003c\/a\u003eBy connecting\u003cem\u003eCV control of gate length and trigger delay\u003c\/em\u003eIt becomes.\u003cbr\u003e \u003cbr\u003e  Each output is connected to the same four channels.\u003ca href=\"\/en\/products\/4ms-vca-matrix-vcam\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVCA Matrix\u003c\/a\u003eYou can also create chaotic beat patterns by using CV control and feedback.\u003cbr\u003e \u003cbr\u003e  Also, by connecting the output from the 4ms QCD to the \"PINGS\" header on the QPLFO board, each output of the QCD can be used as a ping signal for each channel of the QPLFO without patching. If you patch another clock signal to the Ping input, it will switch synchronization to that input clock. An 8-pin cable for connection is included in the QCD. \u003cbr\u003e  \u003c\/div\u003e\n\u003cdiv class=\"image-map-wrapper\"\u003e  \u003cdiv id=\"image-map-pro-container\"\u003e\u003c\/div\u003e\n\u003cspan class=\"image-map-note\"\u003eExplanation of each part is displayed by mouse over\u003c\/span\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/9LfP92iEuDk\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":13198800650309,"sku":"4MSQUACLODIST0048","price":41900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/4ms_QCD.jpg?v=1535421669"},{"product_id":"alm-busy-hpo","title":"ALM busy HPO","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMusic features\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eHPO is only 2 HP headphone output module. Patch only if l channel. \u003cbr\u003e  \u003c\/div\u003e","brand":"ALM Busy","offers":[{"title":"Default Title","offer_id":13222377685061,"sku":"ALMBUSHPO0074","price":15900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/almbusycircuits_hpo_01.jpg?v=1535447351"},{"product_id":"alm-busy-mum-m8","title":"ALM Busy Mum M8","description":"\u003c!-- interface-description --\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe Mum M8 is a low-pass filter with VCA featuring a unique and fat sound, which is based on the filter installed in the sampler name Machine Akai S950. This filter has a unique smooth tone and is very effective not only for regular synths, but also for sound sources with complex frequency configurations and movements.\u003cbr\u003e \u003cbr\u003e There is an input with gain adjustment and one input of unity gain, and the input with the gain adjustment functions as VCA. In addition to the knobs, there is one fm input with out of the cutoff control. Resonance can also be controlled by CV.\u003cbr\u003e \u003cbr\u003e In addition to the smooth core characteristics of the s950 on the base, the Mum M8 also has added rough resonance and input overdrive, so it is also good at dirty acid sound. Like the S950, the analog filter core is controlled by a high-speed digital clock to create a unique smooth texture, but the lower limit of the cutoff is limited to cut off noise. You can adjust this limit in the trimmer at the back of the foundation.\u003cbr\u003e \u003cbr\u003e The Mum M8 is a filter module created by ALM Busy to research the sound of the S950, which was useful in the sampler's famous machine, especially the early jungle sands of the UK and the hardcore fast breakbeats genre. Uk artist Mumdance is also working with us to develop bass music and experimental.\u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\"\u003eDEMO\u003c\/h3\u003e\n\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"360\" mozallowfullscreen=\"\" src=\"https:\/\/player.vimeo.com\/video\/244622439\" webkitallowfullscreen=\"\" width=\"640\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/vimeo.com\/244622439\"\u003eALM018 - 'MUM M8' - Tone sweep\u003c\/a\u003e From \u003ca href=\"https:\/\/vimeo.com\/user3458214\"\u003eAlm\u003c\/a\u003e on \u003ca href=\"https:\/\/vimeo.com\"\u003eVimeo\u003c\/a\u003e.\u003c\/p\u003e\n\u003cbr\u003e \u003cbr\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"360\" mozallowfullscreen=\"\" src=\"https:\/\/player.vimeo.com\/video\/244620760\" webkitallowfullscreen=\"\" width=\"640\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"360\" mozallowfullscreen=\"\" src=\"https:\/\/player.vimeo.com\/video\/244618674\" webkitallowfullscreen=\"\" width=\"640\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"360\" mozallowfullscreen=\"\" src=\"https:\/\/player.vimeo.com\/video\/244617734\" webkitallowfullscreen=\"\" width=\"640\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"360\" mozallowfullscreen=\"\" src=\"https:\/\/player.vimeo.com\/video\/239676112\" webkitallowfullscreen=\"\" width=\"640\"\u003e\u003c\/iframe\u003e","brand":"ALM Busy","offers":[{"title":"Default Title","offer_id":13222379126853,"sku":"ALMBUSMUMM80075","price":39900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/mumm8.jpg?v=1535447353"},{"product_id":"alm-busy-o-a-x2","title":"ALM Busy O\/A\/x2","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eO\/A\/x2 is a two-channel utility that allows you to flip and attenuate input signals and add offset voltages from -8V to 8V. It is very useful for adjusting the modulation signal. It has the following features. \u003cul class=\"inExp\"\u003e\n\u003cli\u003e2 channels\u003c\/li\u003e\n\u003cli\u003eAttenate and inversion of input signals\u003c\/li\u003e\n\u003cli\u003eFurthermore, offset voltage of -8V to 8V is added.\u003c\/li\u003e\n\u003cli\u003eLED that can monitor the sign and size of the output signal\u003c\/li\u003e\n\u003cli\u003eThe jumper setting allows internal termination so that ch1 signal output is added as a ch2 signal input.\u003c\/li\u003e\n\u003cli\u003eReverse connection protection mechanism\u003c\/li\u003e\n\u003cli\u003eThin depth\u003c\/li\u003e\n\u003cli\u003eMade in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ALM Busy","offers":[{"title":"Default Title","offer_id":13222379159621,"sku":"ALMBUSO\/A0076","price":18900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/oax2.jpg?v=1535447355"},{"product_id":"alm-busy-s-b-g","title":"ALM Busy S.B.G","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eTHE ALM BUSY S.B.G IS A COMPACT UTILITY MODULE FOR CONNECTING MODULAR WITH EXTERNAL PEDAL EFFECTS.\u003cbr\u003e \u003cbr\u003e S.B.G receives audio signals from the module as input to\u003cspan style=\"letter-spacing: 0.10035em; line-height: 1.9;\"\u003eand output the return signal from the effect by boosting it to the modular signal level. In addition, it is possible to set the signal to send the control voltage from the module to the expression input of the pedal through the bottom of the module, and the control voltage is considered as well as the audio, and the 4HP pedal interface module can seamlessly connect the pedal and modular world with a surprisingly rich basic function.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cbr\u003e It also comes with the Floating Ring Cable to send the control voltage correctly and two conversion connectors from 1\/4''to 3.5mm for audio input and output of the effect pedal.\u003cbr\u003e  \u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\"\u003eDEMO\u003c\/h3\u003e\n\u003ciframe allowfullscreen=\"\" height=\"281\" mozallowfullscreen=\"\" src=\"\/\/player.vimeo.com\/video\/92257907\" webkitallowfullscreen=\"\" width=\"500\"\u003e\u003c\/iframe\u003e","brand":"ALM Busy","offers":[{"title":"Default Title","offer_id":13222391021637,"sku":"ALMBUSSB0087","price":22900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/alm_sbg_01_1.jpg?v=1535447366"},{"product_id":"alm-busy-tangle-quartet","title":"ALM busy tangle Quartet","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMusic features\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eTangle Quartet is a clean and compact 4-channel linear VCA mixer. Mix output mixes only unpatched signals. \u003cul class=\"inExp\"\u003e\n\u003cli\u003e4 clean VCA with no sound leak on compact\u003c\/li\u003e\n\u003cli\u003eLow noise and low distortion using VCA IC\u003c\/li\u003e\n\u003cli\u003eInput is a DC couple, so it can be used for CV processing besides audio\u003c\/li\u003e\n\u003cli\u003eThe attenuator works as a manual gain control when it is not patched to the CV input\u003c\/li\u003e\n\u003cli\u003eMix output only mixes the output that is not patched to the individual output.\u003c\/li\u003e\n\u003cli\u003ePower back protection\u003c\/li\u003e\n\u003cli\u003eA shallow depth\u003c\/li\u003e\n\u003cli\u003eMade in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ALM Busy","offers":[{"title":"Default Title","offer_id":13222391447621,"sku":"ALMBUSTANQUAR0089","price":37900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/almbusycircuits_tanglequartet_01_1.jpg?v=1535447369"},{"product_id":"erica-synths-pico-input","title":"Erica Synths Pico Input","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThis is an input module that can boost the volume level from a modular external synth to a mobile phone sound source to a modular level.\u003cbr\u003e \u003cbr\u003e  Feature\u003cbr\u003e  Independent inputs for L and R\u003cbr\u003e  Stereo input\u003cbr\u003e  Gain can be adjusted separately for L and R, so you can adjust two mono signals separately\u003cbr\u003e  With LED to display signal level\u003cbr\u003e  \u003c\/div\u003e","brand":"Erica Synths","offers":[{"title":"Default Title","offer_id":13344936886341,"sku":"ERISYNPICINPU0100","price":13900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Pico_INPUT_1.jpg?v=1535603053"},{"product_id":"erica-synths-pico-modulator","title":"Erica Synths Pico Modulator","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003ePico Modulator is a 3HP enveloped VCA. A switch can be used to switch between an AD envelope without sustain (switch = Trig) and an ASR envelope with 100% sustain (switch = Gate). When not patched to \"Gate\", it will automatically cycle attack and decay.\u003cbr\u003e  \u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/uepM-sCQ84E\" width=\"560\"\u003e\u003c\/iframe\u003e","brand":"Erica Synths","offers":[{"title":"Default Title","offer_id":13344948944965,"sku":"ERISYNPICMODU0101","price":23900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/PicoMOD.jpg?v=1535603057"},{"product_id":"erica-synths-pico-output","title":"Erica Synths Pico Output","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eOutput module with headphone output and 3.5mm stereo output. Headphone out is volume adjustable.\u003c\/div\u003e","brand":"Erica Synths","offers":[{"title":"Default Title","offer_id":13344952844357,"sku":"ERISYNPICOUTP0102","price":17900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Pico_OUT_1.jpg?v=1535603061"},{"product_id":"expert-sleepers-es-5-mk3","title":"Expert Sleepers ES-5 mk3","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cem\u003e* This module is a plug-in for Expert Sleepers.\u003ca href=\"http:\/\/www.expert-sleepers.co.uk\/silentway.html\" target=\"main\"\u003e Silent Way \u003c\/a\u003eThis module is based on the use of software that issues a CV from the audio interface.\u003c\/em\u003ePlease note that we do not have the sales and support of the software.\u003cbr\u003e \u003cbr\u003e \u003ca href=\"\/en\/products\/10101\" target=\"main\"\u003eES-3\u003c\/a\u003eis an extension module.\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/www.expert-sleepers.co.uk\/silentway.html\" target=\"main\"\u003eSilent Way\u003c\/a\u003eThe \"ES-5 Controller\" plug-in allows you to transfer eight gate signals in 2CH minutes, out of the signal 8CH sent via ADAT.The ES-5 can be extracted from ES-3 as an expander of ES-3 and output by ES-5.This allows you to output CV6CH minutes from ES-3 with one ADAT cable, and extend the gate signal 8CH to output from ES-5.\u003cbr\u003e \u003cbr\u003e \u003c!--\n\u003cdiv class=\"figure-block\"\u003e\n\u003cdiv class=\"cap\"\u003e\n\u003ca href=\"\"\u003e\u003cimg alt=\"\" src=\"\" width=\"300px\"\u003e \u003c\/a\u003e\n\u003cp\u003e\n\u003cspan class=\"capTitle\"\u003e \u003c\/span\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n--\u003e\u003c!-- figure-block--\u003e\n\u003c\/div\u003e","brand":"Expert Sleepers","offers":[{"title":"Default Title","offer_id":13358231453765,"sku":"EXPSLEES-MK30115","price":23900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/es-5.jpg?v=1535622665"},{"product_id":"expert-sleepers-es-8","title":"Expert Sleepers ES-8","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eES-8 IS A USB2.0 CLASS COMPLIANT\u003cb\u003eAudio Interface Module\u003c\/b\u003eIs. With the addition of ADAT input and output, up to 12 inputs and 16 outputs are possible. Input and output is for DC coupling\u003cstrong\u003eBoth CV and audio input and output are possible.\u003c\/strong\u003edirectly compatible with computer-based CV-generating software and iOS apps such as Silent Way, Max\/MSP, Reaktor, Ableton CV Tools, audulus (we do not sell or support these softwares). ES-8\u003cstrong\u003eADAT Input and Output\u003c\/strong\u003eBecause there is, in ADAT\u003ca href=\"\/en\/products\/expert-sleepers-es-3-mk4\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eES-3\u003c\/a\u003eIf you connect the output to,\u003ca href=\"\/en\/products\/expert-sleepers-es-6-mk2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eES-6\u003c\/a\u003eAnd\u003ca href=\"\/en\/products\/expert-sleepers-es-7\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eES-7\u003c\/a\u003eyou can extend the input by connecting to. Of course, non-modular ADAT equipment can also be connected.\u003cbr\u003e \u003cbr\u003e When not connected to USB, the ES-8 is not an audio interface\u003cb\u003eStandalone mode\u003c\/b\u003eact as an AD\/DA converter module that converts ADAT input and output and analog signals.\u003cbr\u003e\n\u003cul class=\"inExp\"\u003e\n\u003cli\u003eNumber of Input\/Output channels: input x12, output x16\u003c\/li\u003e\n\u003cli\u003eSample rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz\u003c\/li\u003e\n\u003cli\u003eThe ES-8 has a high-quality clock and can optionally be synchronized with the clock from the ADAT input.\u003c\/li\u003e\n\u003cli\u003eAudio sample: 24-bit\u003c\/li\u003e\n\u003cli\u003eOutput Jack: 8x3.5mm TS Jack, DC Coupled Output\u003c\/li\u003e\n\u003cli\u003eMaximum output voltage: approx. +\/-10V DC\u003c\/li\u003e\n\u003cli\u003eAnalog input jack: 4x3.5mm TS jack, DC coupled input\u003c\/li\u003e\n\u003cli\u003eInput voltage range: approx. +\/-10V\u003c\/li\u003e\n\u003cli\u003eDigital Input\/Output: 1xADAT input, 1xADAT output\u003c\/li\u003e\n\u003cli\u003eExtended header: 1xES-5 socket, 1xES-6 socket\u003c\/li\u003e\n\u003cli\u003eUSB socket: Type B\u003c\/li\u003e\n\u003cli\u003eDriver Support: USB2.0 (macOS and iOS do not require driver installation, Windows 7,8,10 windows driver\u003ca href=\"http:\/\/www.expert-sleepers.co.uk\/downloads.html#drivers\" target=\"main\"\u003eHere\u003c\/a\u003eto download and install. )\u003c\/li\u003e\n\u003c\/ul\u003e  \u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eCONTROLL\u003c\/h3\u003e A description of each part pops up with a mouse over \u003cdiv id=\"image-map-pro-container\"\u003e\u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Nf9FkiqkvM8\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cscript type=\"text\/javascript\"\u003e\/\/ \u003c![CDATA[\n        ;(function ($, window, document, undefined) {\n            $(document).ready(function() {\n$('#image-map-pro-container').imageMapPro({\"id\":7528,\"editor\":{\"selected_shape\":\"rect-3373\",\"tool\":\"select\",\"shapeCounter\":{\"rects\":1,\"polys\":1}},\"general\":{\"name\":\"ES-8\",\"shortcode\":\"Odessa\",\"width\":154,\"height\":500,\"naturalWidth\":154,\"naturalHeight\":500},\"image\":{\"url\":\"https:\/\/www.dropbox.com\/s\/weswexp5sjaxpxm\/ES-8.jpg?raw=1\"},\"tooltips\":{\"sticky_tooltips\":1,\"tooltip_animation\":\"fade\",\"fullscreen_tooltips\":\"none\"},\"spots\":[{\"id\":\"rect-8496\",\"title\":\"Rect 0 Copy\",\"type\":\"rect\",\"x\":9.091,\"y\":39.8,\"width\":38.119,\"height\":9.804,\"x_image_background\":9.091,\"y_image_background\":39.8,\"width_image_background\":38.119,\"height_image_background\":9.804,\"default_style\":{\"opacity\":0.88,\"border_radius\":10,\"background_color\":\"#ffffff\",\"border_color\":\"#46FF33\"},\"mouseover_style\":{\"border_radius\":10,\"background_color\":\"#A0F90F\",\"background_opacity\":0.44,\"border_width\":4,\"border_color\":\"#95E610\"},\"tooltip_style\":{\"border_radius\":5,\"padding\":5,\"background_opacity\":0.8236979166666667,\"width\":104,\"auto_width\":0,\"offset_x\":36.267412337662336,\"offset_y\":3.53125},\"tooltip_content\":{\"squares_settings\":{\"containers\":[{\"id\":\"sq-container-664551\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Heading\",\"iconClass\":\"fa fa-header\"},\"options\":{\"heading\":{\"text\":\"ADAT Output\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":0,\"left\":5,\"right\":5}}},\"font\":{\"font_size\":\"18\",\"font_weight\":\"bold\",\"line_height\":\"20\"}}}]}},{\"id\":\"sq-container-423081\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Paragraph\",\"iconClass\":\"fa fa-paragraph\"},\"options\":{\"text\":{\"text\":\"ADAT出力\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":5,\"left\":5,\"right\":5}}}}}]}}]}}},{\"id\":\"rect-1404\",\"title\":\"Rect 0 Copy Copy\",\"type\":\"rect\",\"x\":5.194,\"y\":49.996,\"width\":42.664,\"height\":41.604,\"x_image_background\":5.194,\"y_image_background\":49.996,\"width_image_background\":42.664,\"height_image_background\":41.604,\"default_style\":{\"opacity\":0.88,\"border_radius\":10,\"background_color\":\"#ffffff\",\"border_color\":\"#46FF33\"},\"mouseover_style\":{\"border_radius\":10,\"background_color\":\"#A0F90F\",\"background_opacity\":0.44,\"border_width\":4,\"border_color\":\"#95E610\"},\"tooltip_style\":{\"border_radius\":5,\"padding\":5,\"background_opacity\":0.8236979166666667,\"width\":163,\"auto_width\":0,\"offset_x\":27.52229545454546,\"offset_y\":1.529},\"tooltip_content\":{\"squares_settings\":{\"containers\":[{\"id\":\"sq-container-108591\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Heading\",\"iconClass\":\"fa fa-header\"},\"options\":{\"heading\":{\"text\":\"Analog Input\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":0,\"left\":5,\"right\":5}}},\"font\":{\"font_size\":\"18\",\"font_weight\":\"bold\",\"line_height\":\"20\"}}}]}},{\"id\":\"sq-container-920021\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Paragraph\",\"iconClass\":\"fa fa-paragraph\"},\"options\":{\"text\":{\"text\":\"4つのアナログシグナル入力。-10V〜10Vのレンジのシグナルを入力できます。CVのようなゆっくりと動く信号(DC)も入力可能です。\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":5,\"left\":5,\"right\":5}}}}}]}}]}}},{\"id\":\"rect-3373\",\"title\":\"Rect 0 Copy Copy\",\"type\":\"rect\",\"x\":6.493,\"y\":18,\"width\":38.119,\"height\":9.804,\"x_image_background\":6.493,\"y_image_background\":18,\"width_image_background\":38.119,\"height_image_background\":9.804,\"default_style\":{\"opacity\":0.88,\"border_radius\":10,\"background_color\":\"#ffffff\",\"border_color\":\"#46FF33\"},\"mouseover_style\":{\"border_radius\":10,\"background_color\":\"#A0F90F\",\"background_opacity\":0.44,\"border_width\":4,\"border_color\":\"#95E610\"},\"tooltip_style\":{\"border_radius\":5,\"padding\":5,\"background_opacity\":0.8236979166666667,\"position\":\"bottom\",\"width\":162,\"auto_width\":0,\"offset_x\":32.37120454545454,\"offset_y\":-1.4727499999999907},\"tooltip_content\":{\"squares_settings\":{\"containers\":[{\"id\":\"sq-container-315511\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Heading\",\"iconClass\":\"fa fa-header\"},\"options\":{\"heading\":{\"text\":\"USB(TYPE B) Jack\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":0,\"left\":5,\"right\":5}}},\"font\":{\"font_size\":\"18\",\"font_weight\":\"bold\",\"line_height\":\"20\"}}}]}},{\"id\":\"sq-container-897661\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Paragraph\",\"iconClass\":\"fa fa-paragraph\"},\"options\":{\"text\":{\"text\":\"USB(TYPE B)ソケットです。オーディオインターフェースとして使用する時にコンピューターと接続します。\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":5,\"left\":5,\"right\":5}}}}}]}}]}}},{\"id\":\"rect-5412\",\"title\":\"Rect 0 Copy Copy Copy\",\"type\":\"rect\",\"x\":50.842,\"y\":7.8,\"width\":49.158,\"height\":83.204,\"x_image_background\":50.842,\"y_image_background\":7.8,\"width_image_background\":49.158,\"height_image_background\":83.204,\"default_style\":{\"opacity\":0.88,\"border_radius\":10,\"background_color\":\"#ffffff\",\"border_color\":\"#46FF33\"},\"mouseover_style\":{\"border_radius\":10,\"background_color\":\"#A0F90F\",\"background_opacity\":0.44,\"border_width\":4,\"border_color\":\"#95E610\"},\"tooltip_style\":{\"border_radius\":5,\"padding\":5,\"background_opacity\":0.8236979166666667,\"width\":163,\"auto_width\":0,\"offset_x\":-10.140967532467528,\"offset_y\":41.53125},\"tooltip_content\":{\"squares_settings\":{\"containers\":[{\"id\":\"sq-container-333801\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Heading\",\"iconClass\":\"fa fa-header\"},\"options\":{\"heading\":{\"text\":\"Analog Output\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":0,\"left\":5,\"right\":5}}},\"font\":{\"font_size\":\"18\",\"font_weight\":\"bold\",\"line_height\":\"20\"}}}]}},{\"id\":\"sq-container-913851\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Paragraph\",\"iconClass\":\"fa fa-paragraph\"},\"options\":{\"text\":{\"text\":\"8つのアナログシグナル出力。-10V〜10Vのレンジのシグナルを出力できます。CVのようなゆっくりと動く信号(DC)も出力可能です。\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":5,\"left\":5,\"right\":5}}}}}]}}]}}},{\"id\":\"rect-4913\",\"title\":\"Rect 0 Copy Copy Copy\",\"type\":\"rect\",\"x\":7.792,\"y\":28.8,\"width\":38.119,\"height\":9.804,\"x_image_background\":7.792,\"y_image_background\":28.8,\"width_image_background\":38.119,\"height_image_background\":9.804,\"default_style\":{\"opacity\":0.88,\"border_radius\":10,\"background_color\":\"#ffffff\",\"border_color\":\"#46FF33\"},\"mouseover_style\":{\"border_radius\":10,\"background_color\":\"#A0F90F\",\"background_opacity\":0.44,\"border_width\":4,\"border_color\":\"#95E610\"},\"tooltip_style\":{\"border_radius\":5,\"padding\":5,\"background_opacity\":0.8236979166666667,\"width\":104,\"auto_width\":0,\"offset_x\":36.267412337662336,\"offset_y\":3.53125},\"tooltip_content\":{\"squares_settings\":{\"containers\":[{\"id\":\"sq-container-226721\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Heading\",\"iconClass\":\"fa fa-header\"},\"options\":{\"heading\":{\"text\":\"ADAT Input\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":0,\"left\":5,\"right\":5}}},\"font\":{\"font_size\":\"18\",\"font_weight\":\"bold\",\"line_height\":\"20\"}}}]}},{\"id\":\"sq-container-812751\",\"settings\":{\"elements\":[{\"settings\":{\"name\":\"Paragraph\",\"iconClass\":\"fa fa-paragraph\"},\"options\":{\"text\":{\"text\":\"ADAT入力\"},\"layout\":{\"box_model\":{\"padding\":{\"top\":5,\"bottom\":5,\"left\":5,\"right\":5}}}}}]}}]}}}]});\n\n });\n        })(jQuery, window, document);\n    \n\/\/ ]]\u003e\u003c\/script\u003e","brand":"Expert Sleepers","offers":[{"title":"Default Title","offer_id":13358233583685,"sku":"EXPSLEES-0117","price":88900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/es-8.jpg?v=1535622670"},{"product_id":"10208","title":"Intellijel Designs Audio Interface II","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eAudio Interface II is a high quality stereo input \/ output module. It is possible to boost the level so that the output of synths, PC audio interfaces, pedal effects, etc. that are lower than the normal level of the Eurorack can be processed by the Eurorack, and on the contrary, the output of the Eurorack can be attenuated to the line level and output is. As well as stereo use, the gain can be set independently for L and R, so both input and output can be used as 2x mono.\u003cbr\u003e  \u003c\/div\u003e\n\n\u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eInterface\u003c\/h4\u003e\n\u003cdiv class=\"image-map-wrapper\"\u003e  \u003cdiv id=\"image-map-pro-container\"\u003e\u003c\/div\u003e\n\u003cspan class=\"image-map-note\"\u003eExplanation of each part is displayed by mouse over\u003c\/span\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612409126981,"sku":"INTDESAUDINTE0141","price":0.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Audio_20Interface_20II.jpg?v=1536166420"},{"product_id":"10211","title":"Intellijel Designs Buff Mult","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e2HP compact 2X3 output multiple. Because it is a bafared type, the stability is high in high accuracy. It is also ideal for multiple such as pitch. It also functions as a multiple of the 1X6 output because the 1CH signal is internally connected to the 2CH signal input.\u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612410142789,"sku":"INTDESBUFMULT0150","price":12900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Buff-Mult-new.png?v=1642227839"},{"product_id":"10212","title":"Intellijel Designs Buff Mult 1U","description":"\u003cb\u003eIntellijel's 1U module is not compatible with the 1U \"TILE\" format smade by Synthrotek or Pulp Logic. Install it in intellijel 4U, 7U case, etc. For Intellijel 1U size specifications, see\u003ca href=\"https:\/\/intellijel.com\/technical-specifications\/\" target=\"main\"\u003eHere\u003c\/a\u003efor more information.\u003c\/b\u003e\u003cbr\u003e   \u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e1U Bafardo Multiple. The input signal to the first channel is internally connected to the second input.\u003cbr\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612410896453,"sku":"INTDESBUFMULT0151","price":7900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Buff-Mult-1U-new.png?v=1642228472"},{"product_id":"10214","title":"Intellijel Designs Digiverb 1U","description":"\u003cb\u003eThe 1 U module of Intellijel is not compatible with the 1 U \"TILE\" format made in Synthrotek and Pulp Logic. I install it in 4 U of Intellijel, a 7 U case, and, please use it. About the size specifications of Intellijel 1 U\u003ca href=\"https:\/\/intellijel.com\/technical-specifications\/\" target=\"main\"\u003eThis\u003c\/a\u003eGive me をご 覧.\u003c\/b\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e1Uのリバーブモジュールです。スプリングリバーブとマルチタップディレイの中間のような音で、音楽的なローファイさのあるサウンドです。\u003cbr\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612421152837,"sku":"INTDESDIG1U0153","price":12900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Digiverb_1U.jpg?v=1539245808"},{"product_id":"10216","title":"Intellijel Designs Dixie II+","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eDixie II+ is a different version of Dixie II that has been added a little larger and more functional. The sound is the same, but instead of the coarse knob of the pitch being abolished, the octave switch is attached, and pw control knobs and FM attenuators have been added. It's easier to use as an oscillator than the original Dixie II, which was perfect for FM modulators. Sync options have also been added. \u003cul class=\"inExp\"\u003e\n\u003cli\u003e8-position octave switch\u003c\/li\u003e\n\u003cli\u003eThe fine tuning knob is a coarse speed knob in LFO mode.\u003c\/li\u003e\n\u003cli\u003eThere are two FM inputs other than 1V\/Oct, FM1 can switch between exponential and linear characteristics with attenuator\u003c\/li\u003e\n\u003cli\u003ePulse width can be controlled by CV with knob and attenuator\u003c\/li\u003e\n\u003cli\u003eHard sink input to reset to 0V\u003c\/li\u003e\n\u003cli\u003eFlip Sync is a sink that reverses the waveform and is a sink similar to DixieII\u003c\/li\u003e\n\u003cli\u003e6 outputs of sign, triangle, unique zigzag wave, saw, pulse, suboctave\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eInterface\u003c\/h4\u003e\n\n\u003cdiv class=\"image-map-wrapper\"\u003e  \u003cdiv id=\"image-map-pro-container\"\u003e\u003c\/div\u003e\n\u003cspan class=\"image-map-note\"\u003eMouse over to see a description of each part\u003c\/span\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612422889541,"sku":"INTDESDIXII+0155","price":42900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/dixie2plus.jpg?v=1536166434"},{"product_id":"10222","title":"Intellijel Designs Line Out 1U","description":"\u003cb\u003eIntellijel's 1U module is not compatible with the 1U \"TILE\" format smade by Synthrotek or Pulp Logic. Install it in intellijel 4U, 7U case, etc. For Intellijel 1U size specifications, see\u003ca href=\"https:\/\/intellijel.com\/technical-specifications\/\" target=\"main\"\u003eHere\u003c\/a\u003efor more information.\u003c\/b\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThis module outputs a modular output at line level with a 1\/4 inch TRS balance cable.\u003cbr\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612433834053,"sku":"INTDESLINOUT0162","price":6900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Line_20Out_201U.jpg?v=1536166445"},{"product_id":"10225","title":"Intellijel designs mixup","description":"\u003cdiv class=\"interface-description\"\u003e\u003c\/div\u003e\n\u003c!-- interface-description --\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMusic features\u003c\/h3\u003e Mixup is a compact muted mixer with stereo input and output. The front panel has audio input below. \u003cul class=\"inExp\"\u003e\n\u003cli\u003eInput 1 and 2 have gain adjustment knob and mute switch with mono input\u003c\/li\u003e\n\u003cli\u003eInput 3 is a stereo input\u003c\/li\u003e\n\u003cli\u003eInput 4 is a stereo gain\u003c\/li\u003e\n\u003c\/ul\u003e You can also chain the chain with the included chain cable. By connecting a cable from another mixup's \"out\" header to the underlying \"in\" header of mixup, the output of one mixup is mixed into the next mixup output.\u003cbr\u003e \u003cbr\u003e \u003cimg src=\"https:\/\/www.dropbox.com\/s\/nuztxlgm3i4yeal\/mix_up.jpg?raw=1\" width=\"500px\"\u003e\u003cbr\u003e Chain appearance\u003cbr\u003e \u003cbr\u003e Mixup cannot be used for CV coupling for AC coupling \u003c!-- ツールチップ表示のため、商品メイン画像上にマップを作成。--\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDemo\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ciframe allow=\"autoplay; encrypted-media\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GRFZ8Hz0bwo\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612438323269,"sku":"INTDESMIX0165","price":16900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Mixup.jpg?v=1536166452"},{"product_id":"10227","title":"Intellijel Designs Mult","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003ePassive multiple x 2.\u003cbr\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612440092741,"sku":"INTDESMUL0167","price":5900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/mult-3u.png?v=1642228096"},{"product_id":"10228","title":"Intellijel marks","description":"\u003cb\u003eThe 1U module of intellijel is not compatible with the synonytek and 1p \"scale\" format made by pulp logic. Install in 4U, 7U case of intellijel. Size specification for intellijel 1U\u003ca href=\"https:\/\/intellijel.com\/technical-specifications\/\" target=\"main\"\u003eHere\u003c\/a\u003eSee.\u003c\/b\u003e\u003cbr\u003e \u003cbr\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMusic features\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e1x5 passive multiple 2 1U modules.\u003cbr\u003e \u003cbr\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612442452037,"sku":"INTDESMUL1U0168","price":4900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Mult_201U.jpg?v=1536166456"},{"product_id":"10230","title":"Intellijel Designs Noise Random Tools 1U","description":"\u003cb\u003eIntellijel's 1U module is not compatible with the 1U \"TILE\" format smade by Synthrotek or Pulp Logic. Install it in intellijel 4U, 7U case, etc. For Intellijel 1U size specifications, see\u003ca href=\"https:\/\/intellijel.com\/technical-specifications\/\" target=\"main\"\u003eHere\u003c\/a\u003efor more information.\u003c\/b\u003e\u003cbr\u003e \u003cbr\u003e \u003cem class=\"inExp\"\u003eThis is the next reservation page for arrival. Put the item in your cart and complete your reservation through the normal purchase process. The payment deadline is five days after receiving this item. It is scheduled to be in stock at the end of August. This page is for pre-orders. Payment is due 5 in due days from the arrival day. ETA: Late Aug \u003c\/em\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eA toolbox module with noise sample and hold-through limiter functions at 1U. \u003cul class=\"inExp\"\u003e\n\u003cli\u003eA clock that can adjust the speed and a random pulse output linked to it\u003c\/li\u003e\n\u003cli\u003eAnalog Pink Noise White Noise Output\u003c\/li\u003e\n\u003cli\u003eAnalog Samples \u0026amp; Hold\u003c\/li\u003e\n\u003cli\u003eAnalog Through Limiter\u003c\/li\u003e\n\u003c\/ul\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612447825989,"sku":"INTDESNOIRAND0170","price":18900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Noise_20Tools_201U.jpg?v=1536166460"},{"product_id":"10233","title":"Intellijel Designs Phones 1U","description":"\u003cb\u003eIntellijel's 1U module is not compatible with the 1U \"TILE\" format smade by Synthrotek or Pulp Logic. Install it in intellijel 4U, 7U case, etc. For Intellijel 1U size specifications, see\u003ca href=\"https:\/\/intellijel.com\/technical-specifications\/\" target=\"main\"\u003eHere\u003c\/a\u003efor more information.\u003c\/b\u003e\u003cbr\u003e \u003cbr\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e1\/4 inch headphone output (TRS) module. Can also be used as stereo line output\u003cbr\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612451594309,"sku":"INTDESPHO1U0173","price":13900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Phones-1u.jpg?v=1536166465"},{"product_id":"10234","title":"Intellijel Designs Planar 2","description":"\u003cdiv class=\"interface-description\"\u003e\u003c\/div\u003e\n\u003c!-- interface-description --\u003e\n\u003ch3 class=\"clockface-description-title\"\u003eMUSICAL FEATURES\u003c\/h3\u003e Planar 2 is CV\/ audio mixer of the many input and output that made the most of a characteristic of the joy-stick, パンナー. By unique operability of the joy-stick, I can perform a delicate and large number of control at the same time.\u003cbr\u003e \u003cbr\u003e There are four to A - D in the input, and these are mixed with balance controlled with joy-stick, and it is output by MIX OUT. By this function with joy-stick\u003cb\u003eIt is mixture cross fading with four signals\u003c\/b\u003eI can do it. In addition, a signal made individual アッテネート is output by output of A - D. The same signal of different アッテネート quantity can extract it from output A - D if I patch input only in A because it is connected the inside as for the input to the next input. Therefore\u003cb\u003eStereo \/ クアッドパンナー\u003c\/b\u003eとしても use is possible. Because it is connected the inside, I can use 10V for input as quad controller (ABCD OUT) when I patch nothing. XY OUT always functions as simple X\/Y controller regardless of input. Audio system, both CV can input each input.\u003cbr\u003e \u003cbr\u003e In Planar 2 movement of the joy-stick\u003cb\u003eRecord\u003c\/b\u003eI was able to do it. Of the movement that is relatively slow in one-shot reproduction and a loop being possible as for the movement that they recorded\u003cb\u003eEnvelope\u003c\/b\u003eや\u003cb\u003eLFO\u003c\/b\u003eとしても use is possible. When I revitalize the movement that I recorded, the movement of the real joy-stick is not reflected. Because overwrite by the punch in is possible; a position\u003cb\u003eJump\u003c\/b\u003eI can make the movement to do. I appoint it with a button in the timing of a start and the stop of a record and the reproduction, but trigger input can synchronize.\u003cbr\u003e \u003cbr\u003e In addition, movement of the joy-stick became more fluent with 2. It is the controller that a slow delicate change is most suitable for necessary アンビエント.\u003cbr\u003e   \u003ch4 class=\"clockface-description-title\"\u003eInterface\u003c\/h4\u003e\n\n\u003cdiv class=\"image-map-wrapper\"\u003e  \u003cdiv id=\"image-map-pro-container\"\u003e\u003c\/div\u003e\n\u003cspan class=\"image-map-note\"\u003eThe explanation of all parts is displayed in mouse over\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003e\u003ciframe allow=\"autoplay; encrypted-media\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/xgvCpYEPBMc\" width=\"560\" style=\"font-size: 15px;\"\u003e\u003c\/iframe\u003e\u003c\/h3\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 class=\"clockface-description-title\"\u003eFirmware Update\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe procedures of the firmware update are as follows.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eI drop the power supply of the module\u003c\/li\u003e\n\u003cli\u003eI connect a USB cable to a computer from the module back.\u003c\/li\u003e\n\u003cli\u003eIntellijelの\u003ca href=\"https:\/\/intellijel.com\/support\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePage\u003c\/a\u003eI open up the updater that downloaded から, and a choice does a module and a version from a drop-down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eABCD button\u003c\/span\u003eIn spite of being push, I spend the power supply of the module again\u003c\/li\u003e\n\u003cli\u003eThe retainer of the updater has it\u003cb\u003eUpdate\u003c\/b\u003eA progress bar begins when I push the button and is the update end if a message called \"Update completed successfully\" is displayed last\u003c\/li\u003e\n\u003cli\u003eI work in new firmware if I reboot a modular\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612454674501,"sku":"INTDESPLA20174","price":63900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/planar2.jpg?v=1536166467"},{"product_id":"10236","title":"Intellijel Designs Plonk","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e Plonk is aimed for the sound generation that is パーカッシブ which even a pace signal of 1V\/Oct can control in the voice module which modeled the pronunciation mechanism of the straight musical instrument. It was developed by collaboration with Applied Acoustic Systems which released physical modeling-based plug in including Chromaphone quickly.\u003cbr\u003e \u003cbr\u003e Model in a process beating quality to lead to the pronunciation with the physical modeling synthesizers such as Plonk\u003cem class=\"inExp\"\u003eExciter\u003c\/em\u003e) and model of the process that an object vibrates afterwards and becomes the pedal point, and damps\u003cem class=\"inExp\"\u003eレゾネーター\u003c\/em\u003eI put two of) together and set a tone.\u003cbr\u003e The exciter has mallet and two kinds of types called the noise. レゾネーター has the types such as a beam, a marimba, a drumhead, a film, a board, the string. Each model of exciter and レゾネーター has a lot of parameters that I can coordinate and can non-create various percussions sounds to the existing real sound from the existing real sound. For example, it is a kick, タム, cymbals, crap, traditional straight drum sounds such as the conga, a vibraphone, a marimba, the sound with the intervals such as guitars and the electronic percussion sound which is different from it at all.\u003cbr\u003e \u003cbr\u003e Because a tone makes a dynamic sound to change with time, Plonk reacts to modulation input including the velocity dynamically. It is easy to make a totally different tone whenever triggered. Plonk\u003cem class=\"inExp\"\u003eデュオフォニック\u003c\/em\u003eBecause I can let you pronounce it until the sound of で two at the same time, even in the case of the tone that the second sound is totally different from the first sound, an original tone continues changing into the first sound regardless of the second sound.\u003cbr\u003e \u003cbr\u003e Plonk of 128 can memorize pre-seting it, and there is many it, pre-seting it is included at the time of the shipment (can overwrite in a user). A computer can store a patch by MIDI SysEx through the back Universal Serial Bus port.\u003cem class=\"inExp\"\u003eI can control pre-seting it in CV\u003c\/em\u003eです. In addition, the orchid lump is of the parameter by the trigger, the morphing by CV are possible, too. The X,Y,Mod control can assign almost all synthesizer cis parameters. \u003ch4 class=\"clockface-description-title\"\u003eInterface\u003c\/h4\u003e\n\u003cdiv class=\"image-map-wrapper\"\u003e  \u003cdiv id=\"image-map-pro-container\"\u003e\u003c\/div\u003e\n\u003cspan class=\"image-map-note\"\u003eThe explanation of all parts is displayed in mouse over\u003c\/span\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eParameters\u003c\/h3\u003e Every exciter and レゾネーター have a setting parameter in Plonk. Exciter button, the parameter of レゾネーター choose Object button with push, an encoder, and, please set the parameter of the exciter.\u003cbr\u003e   \u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eParameter of the exciter\u003c\/h4\u003e\n\u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cb\u003eMallet\/Noise Mix: \u003c\/b\u003eI control mallet in an exciter and the ratio of noise\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMallet Stiffness: \u003c\/b\u003eI control hardness of the mallet. It becomes the sound that is クリッキー so as to be obstinate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNoise Density: \u003c\/b\u003eI control the pitch of the sound of the noise\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNoise Lowpass\/Highpass Cuttoff\/Q: \u003c\/b\u003eI control a cut-off and the resonance of a low pass and the high-pass filter that a noise requires\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNoise Attack\/Decay\/Envelope Type: \u003c\/b\u003eI regulate an attack and the D Kay of the envelope of the noise to use as an exciter, a type. The type is available from AR and AHR type.\u003c\/li\u003e\n\u003c\/ul\u003e   \u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eParameter of レゾネーター (Object)\u003c\/h4\u003e\n\u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cb\u003eResonator Type: \u003c\/b\u003e I set a type of レゾネーター. I choose it among String, Beam, Marimba, Drumhead, Membrane, Plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResonator Decay: \u003c\/b\u003e I set D Kay time of レゾネーター\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResonator Low Cut: \u003c\/b\u003eI set frequency to perform low-frequency cut of レゾネーター\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResonator Position: \u003c\/b\u003eI set it which part of レゾネーター an exciter beats. Constitution of the frequency of レゾネーター in this way changes. The setting that an edge criticizes towards 0, the middle becomes 127\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResonator Tone: \u003c\/b\u003eEvery frequency of レゾネーター changes D Kay of (パーシャル). This supports that material of レゾネーター changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResonator Inharmonicity:\u003c\/b\u003e I change frequency included in レゾネーター. Frequency nears a fundamental tone if small, and each several ken of cycles open if a value is big.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResonator Pitch Envelope Amount: \u003c\/b\u003eI can regulate the strength of the envelope which I can hang in the pitch of レゾネーター with -64 (-1 octave) - 63 (octave)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResonator Pitch Envelope Time: \u003c\/b\u003eI adjust the time of the envelope which I can hang in the pitch of レゾネーター\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePolyphony: \u003c\/b\u003eI am set like モノフォニックシンセ, and 1 sound eyes do not sound when they set it to 1 when 2 sound eyes are triggered when 1 sound eyes sound. I can let it becomes デュオフォニック and pronounce it until two sounds at the same time when I set it to 2. Even in the case of the tone that is totally different from the first sound in the second sound, as for the first sound, an original tone continues changing regardless of the second sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eList of special parameters that I can assign by Mod input\u003c\/h4\u003e By the Mod input, I can assign the following parameters other than a parameter of exciter and レゾネーター mentioned above, too. \u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cb\u003eIt is King super: \u003c\/b\u003eWhile gate ON is input into MOD input, a sound in front does not sound while a new sound sounds when the second exciter is triggered (it becomes the banging such as モノフォニック). The choked sound is available from レゾネーター, noise exciter, both\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePreset Step: \u003c\/b\u003eI call was appointed by the voltage of the Mod input, pre-seting it and sound it whenever I receive trigger. In the case of setting, the range of I call, pre-seting it pushes the encoder and appoints pre-seting it in the range of A - B by appointing A and B by indication of Pst A:B. (A to pre-set at 0V, B to pre-set at +-5V, the middle voltage pre-set the meantime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRandomize: \u003c\/b\u003e) which is orchid lump is possibility just to push the encoder when I choose (Randomize changing exciter and all the parameters of the object at random when I receive trigger in Mod\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMorph: \u003c\/b\u003eI can change between I appointed, pre-seting it with pre-seting it at the present smoothly by MOD CV when I choose Morph among Mod. Maufe can choose former, pre-seting it by pushing the encoder when I choose Morph.\u003cbr\u003e ※The type of レゾネーター cannot change smoothly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eItem to set from Config button\u003c\/h4\u003e The items which I can set from Config menu are as follows. \u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cb\u003eGain: \u003c\/b\u003eI coordinate the gain of an output sound\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVel: \u003c\/b\u003eI set behavior of the velocity input.\u003cb\u003eAccent\u003c\/b\u003eSetting to attach an accent when a gate is in は Vel, and to pronounce,\u003cb\u003eDynamics\u003c\/b\u003eI control the strength of the exciter by the voltage to は Vel progressively.\u003cb\u003eVolume\u003c\/b\u003eは merely uses Vel input for volume control of the output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInit Preset: \u003c\/b\u003eI return a parameter of pre-seting it of the present to initial state\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSend Presets: \u003c\/b\u003eI transmit pre-seting it through USB-MIDI. I connect to the computer by USB at the same time to tie Plonk to the euro rack power supply and I stand and give the software that Laser Mammoth, SysEx, SysEx transfer such as MIDI-OX are possible. The transmission to a computer of pre-seting it is possible if I push the encoder. When I send pre-seting it to Plonk from a computer, I can send pre-seting it using the SysEx transmission from the software of the errand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"450\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/videoseries?list=PLvZWo9k7KdK5lnj6prSVmU5FcxSyeiacA\" width=\"800\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 class=\"clockface-description-title\"\u003eFirmware Update\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe procedures of the firmware update are as follows.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eI drop the power supply of the module\u003c\/li\u003e\n\u003cli\u003eI connect a USB cable to a computer from the module back.\u003c\/li\u003e\n\u003cli\u003eIntellijelの\u003ca href=\"https:\/\/intellijel.com\/support\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePage\u003c\/a\u003eI open up the updater that downloaded から, and a choice does a module and a version from a drop-down.\u003c\/li\u003e\n\u003cli\u003eI spend the power supply of the module again while pushing the button of the module back\u003c\/li\u003e\n\u003cli\u003eThe retainer of the updater has it\u003cb\u003eUpdate\u003c\/b\u003eA progress bar begins when I push the button and is the update end if a message called \"Update completed successfully\" is displayed last\u003c\/li\u003e\n\u003cli\u003eI work in new firmware if I reboot a modular\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612460048453,"sku":"INTDESPLO0176","price":64900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Plonk.jpg?v=1536166470"},{"product_id":"10239","title":"Intellijel designs power entry Pe1 (2.5mm, for tps80w)","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMusic features\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eIntellijel bus board\u003ca href=\"\/en\/products\/10254\" target=\"main\"\u003eTps80w\u003c\/a\u003e4HP module for pulling power from AC adapter. Choose an AC adapter or no option. This product does not include tps80w.\u003cbr\u003e  \u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":37511318274211,"sku":"INTDESPOWENTR0181","price":5900.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Power-Entry-01-profile1_75a3b4dc-c891-4f5c-a829-7f8f06eafd2d.jpg?v=1536166474"},{"product_id":"10241","title":"Intellijel Designs Quad VCA","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e Quad VCA is four high-performance 4CH VCA mixers which delivered VCA to 12HP of high quality.\u003cbr\u003e \u003cbr\u003e The output becomes the mixer of the nest of boxes structure, and it is to the structure which is mixed by the output of the next channel when the output of each VCA is not patched. Therefore, CH2 is mixed with CH1 when I patch only the output of CH2 and the CH4, and it is output by CH2, and the CH4 is mixed with CH3 particularly, and it is output by CH4. The output of all channels is mixed when I patch only the output of the CH4, and it is output by CH4.\u003cbr\u003e \u003cbr\u003e It is connected the inside so that input CV of the channel in front is performed the same routing of when input CV does not patch it.\u003cbr\u003e \u003cbr\u003e The Level knob is equipped with separately from CV attenuator independently and can set output sound level at the age of CV=0V. While a sound continues coming out consistently if I put up Level knob and input LFO into CV, I can add the volume change by LFO.\u003cbr\u003e \u003cbr\u003e The boost switch of knob and 6dB which can coordinate reaction profile for CV with a direct alignment ... index type continually is equipped with. \u003cdiv class=\"image-map-wrapper\"\u003e  \u003cdiv id=\"image-map-pro-container\"\u003e\u003c\/div\u003e\n\u003cspan class=\"image-map-note\"\u003eThe explanation of all parts is displayed in mouse over\u003c\/span\u003e\n\u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612467388485,"sku":"INTDESQUAVCA0183","price":37900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Quad-VCA.png?v=1653891023"},{"product_id":"intellijel-designs-usb-power-1u","title":"Intellijel Designs USB Power 1U","description":"\u003cb\u003eIntellijel's 1U module is not compatible with the 1U \"TILE\" format from Synthrotek or Pulp Logic. Please install and use it in Intellijel 4U, 7U case etc. For Intellijel 1U size specifications\u003ca href=\"https:\/\/intellijel.com\/technical-specifications\/\" target=\"main\"\u003eHere\u003c\/a\u003eplease look at.\u003c\/b\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThis module supplies electricity from the USB connector. This is useful for driving lamps and MIDI controllers that operate on USB power.\u003cbr\u003e \u003cbr\u003e  Power is drawn from the 5V on the bus board. The connection is made by inserting a 2-pin header cable into the header on the bus board. A current supply of 1A or more is possible, but make sure that the current upper limit of 5V on the bus board is sufficiently lower. The 2-pin header is mounted on TPS30W MAX or TPS80W. Please note that you cannot connect directly to the TPS30W MINI.\u003cbr\u003e \u003cbr\u003e \u003cimg src=\"https:\/\/www.dropbox.com\/s\/5tbywwqoxe0gv3w\/USB-POWER_1U-connection.jpg?raw=1\" width=\"300px\"\u003e\u003cbr\u003e   \u003cdiv id=\" clockface-format\"\u003eFormat: 1U (Power supply is connected with 2-pin cable, connected to 2-pin header on TPS30W MAX or TPS80W)\u003cbr\u003e  Width: 4HP\u003cbr\u003e  Depth: 20mm or less\u003cbr\u003e  Current: Current value of connected device @ 5V\u003cbr\u003e  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Intellijel Designs","offers":[{"title":"Default Title","offer_id":13612500353093,"sku":"INTDESUSBPOWE0205","price":3400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/USB-Power-1U.png?v=1631348417"},{"product_id":"make-noise-maths","title":"Make Noise Maths","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e MATHS is a CV generation\/modulation module that can be compared to swiss army knives because of its versatility. Two envelopes and LFO (CH1 \u0026amp; CH4) combine them with plus alpha to create complex and musical envelopes. In addition, patching can be used to fulfill a variety of functions, including trigger delays, envelope followers, and comparators. \u003cdiv style=\"text-align: left;\"\u003e\n\u003cbr\u003e Two channels that play a central role in MATHS, CH1 and CH4, \u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e- SLEW (through)\u003c\/em\u003e(Enter signal in SIGNAL In and turn off cycle button)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e- AD Envelope\u003c\/em\u003e (Enter the trigger in Trig In and turn off the CYCLE button)\u003c\/li\u003e\n\u003cli\u003e- Repeat the AD envelope.\u003cem\u003eLfo\u003c\/em\u003e(Without entering signal IN or TRIG IN in particular, cycle button ON)\u003c\/li\u003e\n\u003c\/ul\u003e act as one of the SLEW, by entering the gate signal\u003cem\u003eASR Envelope\u003c\/em\u003eCan also be used as.\u003cbr\u003e \u003cbr\u003e The most important parameters of CH1 and CH41,\u003cem\u003eRise Time\/Fall Time\u003c\/em\u003ethe speed of the signal's rise\/fall as follows: \u003cul\u003e\n\u003cli\u003e- When used as SLEW, the degree of change in the input voltage is adjusted separately when the input voltage is increased and down.\u003c\/li\u003e\n\u003cli\u003e- Individual attack time decay time is adjusted as an AD envelope\u003c\/li\u003e\n\u003cli\u003e- LFO adjusts the time when the voltage rises and down individually\u003c\/li\u003e\n\u003c\/ul\u003e RISE\/FALL can be controlled by CV.\u003cbr\u003e \u003cbr\u003e The remaining CH2 and CH3 are simple ± both-facing attenuators\/offsets.\u003cbr\u003e MATHS uses these CH1-CH4\u003cem\u003eSUM or OR\u003c\/em\u003eit is also possible to create complex signals. It is also mounted on CH1 and CH4\u003cem\u003eEOR (END OF RISE)\/EOC (END OF CYCLE)\u003c\/em\u003eGate signals to inform the timing of such, can also be used for a variety of purposes. \u003ca href=\"http:\/\/www.makenoisemusic.com\/manuals\/MATHSmanual2013-japanese.pdf\" target=\"main\"\u003eManual\u003c\/a\u003eThere are also a lot of patch descriptions and TIPS in the second half of the, so please try a variety of patches once.\u003c\/div\u003e\n\n\u003cdiv class=\"image-map-wrapper\"\u003e  \u003cdiv id=\"image-map-pro-container\"\u003e\u003c\/div\u003e\n\u003cspan class=\"image-map-note\"\u003eMouse over to see a description of each part\u003c\/span\u003e  \u003c\/div\u003e\n\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eTips\u003c\/h3\u003e\n\u003cdiv class=\"clockface-clear\"\u003e\n\u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eSignal In\/Trigger In\u003c\/h4\u003e When you enter a trigger signal into MATHS, signal In and Trigger In have the following differences: \u003cul class=\"inEXP\"\u003e\n\u003cli\u003eSignal In Signal In, the fall begins as soon as the trigger is turned off.\u003c\/li\u003e\n\u003cli\u003eTrigger In begins the fall after the specified rise time.\u003c\/li\u003e\n\u003c\/ul\u003e So, when the rise time is set for a long time, if you enter a trigger in Signal In, the envelope starts the release with little standing up, but in the case of Trigger In, it does as the time you set rise → fall.\u003cbr\u003e \u003cbr\u003e In addition, trigger In\u003cem\u003eRetrigger\u003c\/em\u003eBe aware of the presence or absence of Even if trigger In has input when the envelope is rise, the envelope is\u003cem\u003eIt will not be retriggered.\u003c\/em\u003eThis property is very useful when creating a loose envelope from a busy trigger pattern or as a trigger delay as follows: This property also allows the EOC\/EOR output to be\u003cem\u003eClock Divider\u003c\/em\u003ecan be as functional as.\u003cbr\u003e   \u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eLOG\/LIN\/EXP\u003c\/h4\u003e In MATHS, ch1 and CH4 envelopes\u003cem\u003eCurve Characteristics\u003c\/em\u003ecan be adjusted in a very wide range. Log is a pressurized envelope, and EXP is a super snapper and percussive envelope. The adjustment power of this curve is also a big feature of MATHS. \u003cdiv class=\"figure-block\"\u003e\n\u003cdiv class=\"cap\"\u003e\n\u003ca href=\"https:\/\/www.dropbox.com\/s\/09eu1u71k3kgmbp\/MathLog.jpg?raw=1\"\u003e\u003cimg alt=\"Log Curve\" height=\"140px\" src=\"https:\/\/www.dropbox.com\/s\/09eu1u71k3kgmbp\/MathLog.jpg?raw=1\"\u003e \u003c\/a\u003e\n\u003cp\u003eWhen the knob is close to the Log. The envelope becomes an inflated curve.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"cap\"\u003e\n\u003ca href=\"https:\/\/www.dropbox.com\/s\/w8o2ikqgk6swkzg\/MathExp.jpg?raw=1\"\u003e\u003cimg alt=\"Exp Curve\" height=\"140px\" src=\"https:\/\/www.dropbox.com\/s\/w8o2ikqgk6swkzg\/MathExp.jpg?raw=1\"\u003e \u003c\/a\u003e\n\u003cp\u003eWhen the knob is close to Exp. The envelope becomes an inflated curve below.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- figure-block--\u003e You can also self-patch the envelope to your Rise\/Fall time CV input.\u003cem\u003eRise and FALL can also create curves with different characteristics.\u003c\/em\u003e\n\u003cdiv class=\"figure-block\"\u003e\n\u003cdiv class=\"cap\"\u003e\n\u003ca href=\"https:\/\/www.dropbox.com\/s\/t1nj6gq1fh5q8wd\/dorphin.jpg?raw=1\"\u003e\u003cimg height=\"140px\" src=\"https:\/\/www.dropbox.com\/s\/t1nj6gq1fh5q8wd\/dorphin.jpg?raw=1\"\u003e \u003c\/a\u003e\n\u003cp\u003eIf you log the curve characteristics and modulat fall with your own envelope, you will have an envelope that looks like the one above. In order to adjust the amount of modulation with the atte inverter, it is modulated using a variable output, and the atte inverter is made negative. Patch the unity output to the desired modulation destination.\u003cbr\u003e See also the 50-second patch in the MATHS Advanced Envelope Techniques video below.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eAudio Rate\u003c\/h4\u003e By extremely shorting RISE and FALL in CYCLE mode, CH1 and CH4\u003cem\u003e1kHz\u003c\/em\u003ecan also be an instant oscillator. All channels can be processed to audio rates, so they can be used as mixers, or can be used as envelope followers if you enter audio signals into CH1 or CH4 and set RISE and FALL appropriately. In addition, if rise and FALL are increased, the cycle is\u003cem\u003e25 min.\u003c\/em\u003eCan be longer than that. For this reason, it is also possible to design envelopes as a large flow in one song.\u003cbr\u003e   \u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eTrigger Delay\/VC Gate\u003c\/h4\u003e From End of Rise, the input trigger signal is output by the rise time, followed by the gate ON for the fall time. The ability to delay the trigger in this way and output it as a controllable gate\u003cem\u003eTrigger Delay\/VC Gate\u003c\/em\u003eIt is a function that comes in handy very much, such as making a rhythm in a modular. Combined with the nature of the above retrigger, it is possible to use it more organically.\u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/OKdBVhH7gOY\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/y2lcyvKp-rk\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2EmhMRcBEQ0\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/zySMtEwwSJg\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e The oscilloscope shows a complex envelope in one MATHS. Maths is showing the real value as the second half goes.\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/18ve3t1xJVU\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/Mx_3cqPSiP4\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e  \u003c\/div\u003e","brand":"Make Noise","offers":[{"title":"Black","offer_id":44426051256545,"sku":"MAKNOIMAT0246","price":53900.0,"currency_code":"JPY","in_stock":true},{"title":"Silver","offer_id":44426051289313,"sku":"MAKNOIMAT0247","price":53900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/files\/maths-black_29829a29-d839-4aa4-a3ce-4325b8447bf9.png?v=1716977954"},{"product_id":"random-source-serge-divide-by-n-comparator-ncom","title":"Random * Source Serge Divide By N Comparator (÷ NCOM)","description":"\u003cdiv class=\"interface-description\"\u003e\u003c\/div\u003e\n\u003c!-- interface-description --\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eSerge NCOM is a utility module that processes and processes one or two inputs by combining a comparator (right) and a clock divider (left).\u003cbr\u003e \u003cbr\u003e  The comparator is a function that outputs a gate ON when the + input (passing the attenuator and the offset of -5V to 5V) exceeds the-input. \u003cbr.\u003e  In the clock divider section, the output of the comparator is used as input, and the number of dividers is set from 1 to 31 to divide. The number of divides can be voltage controlled (with attenuator). Step Out is an output in which the output voltage increases by 1.67V (1V \/ Oct corresponds to the whole tone) each time one input clock is received, and returns to 0 when the set number of divides is reached.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eAbout Serge\u003c\/b\u003e\u003cbr\u003e  The Serge modular was originally developed as a system with a different voltage and size from the Eurorack, and is now also a Eurorack like this product, but its own rules regarding jacks and voltages to be used are as follows. There is. \u003cul class=\"inExp\"\u003e\n\u003cli\u003eThe voltage range used is smaller than a normal Eurorack module. In the case of an oscillator, the upper and lower width of the voltage is 10 V (10 Vpp) in a normal Eurorack, whereas Serge Euro is 4 to 6 Vpp. The input to the filter etc. is also designed according to the level, so when using with other companies' products, please use the signal booster or attenuator as appropriate.\u003c\/li\u003e\n\u003cli\u003eIn Serge, the expected voltage per jack is represented by color.\u003cbr\u003e  Red: Gate\u003cbr\u003e  White: Unipolar (voltage of 0V or more)\u003cbr\u003e  Black: Bipolar (assuming negative voltage as well as 0V or more)\u003cbr\u003e  Regarding signal speed, all jacks work at audio and CV rates, which is a feature of the Serge system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e   \u003c\/ br.\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003ciframe frameborder=\"no\" height=\"166\" scrolling=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/257463170\u0026amp;color=ff5500\" width=\"100%\"\u003e\u003c\/iframe\u003e","brand":"Random*Source","offers":[{"title":"Default Title","offer_id":15532220842053,"sku":"RANSERDIVBY0316","price":49900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/ncom.jpg?v=1539241089"},{"product_id":"random-source-serge-new-ring-modulator-2017-ring","title":"Random*Source Serge New Ring Modulator 2017 (RING)","description":"\u003cdiv class=\"interface-description\"\u003e\n\u003ch4 class=\"clockface-description-title\"\u003eJacks \u0026amp; Knobs\u003c\/h4\u003e\n\u003ch5 class=\"clockface-description-title\" id=\"out\"\u003eout\u003c\/h5\u003e\n\u003cdiv class=\"clockface-description-contents\" id=\"out\"\u003e\n\u003cp\u003eOut text\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch5 class=\"clockface-description-title\" id=\"signal\"\u003esignal\u003c\/h5\u003e\n\u003cdiv class=\"clockface-description-contents\" id=\"signal\"\u003e\n\u003cp\u003esignal text\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch5 class=\"clockface-description-title\" id=\"carrier\"\u003eCarrier\u003c\/h5\u003e\n\u003cdiv class=\"clockface-description-contents\" id=\"carrier\"\u003e\n\u003cp\u003ecarrier text\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch5 class=\"clockface-description-title\" id=\"am\"\u003eAm\u003c\/h5\u003e\n\u003cdiv class=\"clockface-description-contents\" id=\"am\"\u003e\n\u003cp\u003eam text\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- interface-description --\u003e\n\u003cdiv class=\"imgnote\"\u003eWhen you hover over the screen, it appears in a pop-up.\u003c\/div\u003e\n\u003c!--\n\n\u003cem class=\"inExp\"\u003eこちらは次回入荷分の予約用ページになります。商品をカートに入れ、通常の購入手続きを行って予約を完了してください。お支払い期限はこちらへ入荷後5日となります。5月中旬入荷予定。This page is for pre-orders. Payment is due within 5 days from the arrival day. ETA: Mid May \u003c\/em\u003e\n\n--\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e","brand":"Random*Source","offers":[{"title":"Default Title","offer_id":15532223430725,"sku":"RANSERNEWRING0318","price":58900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/ring.jpg?v=1569399026"},{"product_id":"random-source-serge-new-timbral-oscillator-nto","title":"Random*Source Serge New Timbral Oscillator (NTO)","description":"\u003cdiv class=\"interface-description\"\u003e\n\u003ch4 class=\"clockface-description-title\"\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe NTO is an analog oscillator that forms the core of the Serge system.It is characterized by a combination of vintage sound and high precision, and it also has variable output of variable waveform and portamento-capable 1V\/Oct input.Many output waveforms can also be self-patched for use in the modulation of each parameter.\u003cbr\u003e \u003cbr\u003e Random * Source collaborated with Serge to design and implement the original vintage sound using modern high-end parts.Compared to the original version, the Pulse output has been added.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eAbout Serge\u003c\/b\u003e\u003cbr\u003e The Serge Modular was originally developed as a system with a different voltage and size than the eurolac, and now it is also eurolacized like this product, but there is also a unique decision about the Jack and the voltage to be used. \u003cul class=\"inExp\"\u003e\n\u003cli\u003eThe range of voltages used is smaller than that of a regular eurolac module.In the case of oscillators, the upper and lower end of the voltage width is 10V(10Vpp)for normal eurolacs, while the Serge Euro is 4 to 6Vpp.Since the input to the filter, etc. are also designed to match the level, please use the booster and the attenuator of the signal as appropriate when you use it with other companies ' products.\u003c\/li\u003e\n\u003cli\u003eIn Serge, the expected voltage per Jack is represented by color.\u003cbr\u003e Red: Gate\u003cbr\u003e White:unipolar (0V or higher voltage)\u003cbr\u003e Black: bipolar (0V or more, assuming a negative voltage)\u003cbr\u003e As for the speed of the signal, it works at the rate of the audio rate and the CV in any jack, which is a feature of the Serge system.\u003c\/li\u003e\n\u003c\/ul\u003e  \u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003ciframe frameborder=\"no\" height=\"166\" scrolling=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/313120448\u0026amp;color=ff5500\" width=\"100%\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe frameborder=\"no\" height=\"166\" scrolling=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/285871159\u0026amp;color=ff5500\" width=\"100%\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe frameborder=\"no\" height=\"166\" scrolling=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/251639494\u0026amp;color=ff5500\" width=\"100%\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe frameborder=\"no\" height=\"166\" scrolling=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/251800218\u0026amp;color=ff5500\" width=\"100%\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe seamless=\"\" src=\"https:\/\/bandcamp.com\/EmbeddedPlayer\/track=561280880\/size=large\/bgcol=ffffff\/linkcol=0687f5\/tracklist=false\/artwork=small\/transparent=true\/\" style=\"border: 0; width: 100%; height: 120px;\"\u003eSerge Dual NTO FM by r.c. hoffmann\u003c\/iframe\u003e","brand":"Random*Source","offers":[{"title":"Default Title","offer_id":15532223627333,"sku":"RANSERNEWTIMB0319","price":107900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Serge_NTO_Euro_front_1530.jpg?v=1539241094"},{"product_id":"random-source-serge-triple-waveshaper-tws","title":"Random*Source Serge Triple+ Waveshaper (TWS+)","description":"\u003cdiv class=\"interface-description\"\u003e\u003c\/div\u003e\n\u003c!-- interface-description --\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eTriple Waveshaper is one of the main wave shape shaper modules in the Serge system. Three separate wave shapers allow parallel processing of up to three sounds. The Link switch can also internally connect the output of the lower section to the input of the upper section, allowing the sections to be connected to the serial. The Random*Source version of Serge TWS has been extended, with another shaping circuit added to the serial in the lower most section (\"+1\"), and two circuits connecting two shaping circuits to the serial when only the upper Link switch is on.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eAbout Serge\u003c\/b\u003e\u003cbr\u003e Serge modular was originally developed as a system with different voltages and sizes from Eurorack, and is now euro-racked like this product, but there are also unique rules for jacking and the voltage used. \u003cul class=\"inExp\"\u003e\n\u003cli\u003eThe range of voltageused is smaller than the normal Eurorack module. In a normal Eurorack, the upper and lower end width of the voltage is 10V (10Vpp) while the Serge Euro is 4-6Vpp. Input to the filter is also designed to match the level, so use it through a signal booster or attenuator as appropriate when using it with other companies' products.\u003c\/li\u003e\n\u003cli\u003eIn Serge, the expected voltage for each jack is represented by color.\u003cbr\u003e Red: Gate\u003cbr\u003e White: Unipolar (voltage greater than 0V)\u003cbr\u003e Black: Bipolar (assuming negative voltage as well as 0V or higher)\u003cbr\u003e As for the speed of the signal, it works at audio rate and CV rate in any jack, which is a feature of the Serge system.\u003c\/li\u003e\n\u003c\/ul\u003e  \u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003ciframe frameborder=\"no\" height=\"166\" scrolling=\"no\" src=\"https:\/\/w.soundcloud.com\/player\/?url=https%3A\/\/api.soundcloud.com\/tracks\/310403212\u0026amp;color=ff5500\" width=\"100%\"\u003e\u003c\/iframe\u003e","brand":"Random*Source","offers":[{"title":"Default Title","offer_id":15532224380997,"sku":"RANSERTRIWAVE0320","price":62900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/tws.jpg?v=1539246180"},{"product_id":"tiptop-audio-mantis","title":"Tiptop Audio Mantis Green","description":"※The product of this place has a slip and a small wound with the production process. \u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eMantis is a powered Eurorack case consisting of 104HP x 2 stages (208HP in total). It has been designed very well thought out in power supply, module connectors, positioning, etc., and is a new staple of low-cost powered cases. The color of the leg is the green version\u003cbr\u003e   \u003cul class=\"inExp\"\u003e\n\u003cli\u003e208HP (104HP x 2)\u003c\/li\u003e\n\u003cli\u003eEquipped with 36 connectors for module connection. Toward the front of the case, SECTION A\/B is lower, and SECTION C is on the right side of -12V (red stripe).\u003c\/li\u003e\n\u003cli\u003eThe depth of the installable module is about 50mm in the upper and 60mm lower. See drawing below for inclination and internal structure\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption per rail is 3A@12V (up to 1A for each of the three sections listed on the bus board), 1.1A@-12V, 300mA@5V\u003c\/li\u003e\n\u003cli\u003eThe body is very thin gray plastic.\u003c\/li\u003e\n\u003cli\u003eWeight 3kg (excluding AC adapter)\u003c\/li\u003e\n\u003cli\u003eIt can be placed horizontally, diagonally, and placed in three positions that are almost upright. The plug of the AC adapter jack is also installed on the upper side and the back and can be changed according to the position.\u003c\/li\u003e\n\u003cli\u003eThe rail uses 104HP Z-Rails and the nut (M3) is a bar nut type.\u003c\/li\u003e\n\u003cli\u003eWith AC adapter\u003c\/li\u003e\n\u003c\/ul\u003e ※ When you fold the leg, pull out the place that says \"PULL HERE\" on the leg and move it. Please note that we do not guarantee or repair any leg damage. The guide to how to open\u003ca href=\"http:\/\/www.tiptopaudio.com\/manuals\/Tiptop_Audio_mantis.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere (pdf)\u003c\/a\u003eIs.\u003cbr\u003e ※The product of this page becomes green unlike some photos.\u003cbr\u003e \u003cbr\u003e \u003ca class=\"example-image-link\" data-lightbox=\"example-1\" href=\"https:\/\/www.dropbox.com\/s\/qpaqnhe9843dwer\/Mantis1.jpg?raw=1\"\u003e\u003cimg height=\"200px\" src=\"https:\/\/www.dropbox.com\/s\/qpaqnhe9843dwer\/Mantis1.jpg?raw=1\"\u003e\u003c\/a\u003e \u003ca class=\"example-image-link\" data-lightbox=\"example-1\" href=\"https:\/\/www.dropbox.com\/s\/ynq1glg6vqfm8t3\/Mantis2.jpg?raw=1\"\u003e \u003cimg height=\"200px\" src=\"https:\/\/www.dropbox.com\/s\/ynq1glg6vqfm8t3\/Mantis2.jpg?raw=1\"\u003e\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca class=\"example-image-link\" data-lightbox=\"example-1\" href=\"https:\/\/www.dropbox.com\/s\/l2nw4i213d1iux0\/Mantis3.jpg?raw=1\"\u003e\u003cimg height=\"200px\" src=\"https:\/\/www.dropbox.com\/s\/l2nw4i213d1iux0\/Mantis3.jpg?raw=1\"\u003e\u003c\/a\u003e \u003ca class=\"example-image-link\" data-lightbox=\"example-1\" href=\"https:\/\/www.dropbox.com\/s\/kaefzn148yss441\/Mantis4.jpg?raw=1\"\u003e \u003cimg height=\"200px\" src=\"https:\/\/www.dropbox.com\/s\/kaefzn148yss441\/Mantis4.jpg?raw=1\"\u003e\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca class=\"example-image-link\" data-lightbox=\"example-1\" href=\"https:\/\/www.dropbox.com\/s\/7kzmpx5pe6n848p\/Mantis5.jpg?raw=1\"\u003e\u003cimg height=\"200px\" src=\"https:\/\/www.dropbox.com\/s\/7kzmpx5pe6n848p\/Mantis5.jpg?raw=1\"\u003e\u003c\/a\u003e \u003ca class=\"example-image-link\" data-lightbox=\"example-1\" href=\"https:\/\/www.dropbox.com\/s\/fefi2lc4qismb8a\/Mantis6.jpg?raw=1\"\u003e \u003cimg height=\"200px\" src=\"https:\/\/www.dropbox.com\/s\/fefi2lc4qismb8a\/Mantis6.jpg?raw=1\"\u003e\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e \u003ca class=\"example-image-link\" data-lightbox=\"example-1\" href=\"https:\/\/www.dropbox.com\/s\/1apgwwglhqhlbfv\/Mantis8.jpg?raw=1\"\u003e\u003cimg height=\"200px\" src=\"https:\/\/www.dropbox.com\/s\/1apgwwglhqhlbfv\/Mantis8.jpg?raw=1\"\u003e\u003c\/a\u003e  \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003ca class=\"example-image-link\" data-lightbox=\"example-1\" href=\"https:\/\/www.dropbox.com\/s\/q8b2mpgfh441icv\/Mantis-Dimension2.png?raw=1\"\u003e\u003cimg height=\"300px\" src=\"https:\/\/www.dropbox.com\/s\/q8b2mpgfh441icv\/Mantis-Dimension2.png?raw=1\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Tiptop Audio","offers":[{"title":"Black","offer_id":44449260372193,"sku":"TIPAUDMAN-11297","price":60900.0,"currency_code":"JPY","in_stock":true},{"title":"Green","offer_id":44244336804065,"sku":"TIPAUDMANGREE0378","price":60900.0,"currency_code":"JPY","in_stock":false},{"title":"Blue","offer_id":44244336836833,"sku":"TIPAUDMANBLUE0377","price":60900.0,"currency_code":"JPY","in_stock":false},{"title":"Red","offer_id":44244336869601,"sku":"TIPAUDMANRED0380","price":60900.0,"currency_code":"JPY","in_stock":false},{"title":"Orange","offer_id":44244336902369,"sku":"TIPAUDMANORAN0379","price":60900.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/files\/Mantis-black.png?v=1706148347"},{"product_id":"wmd-buffered-mult","title":"WMD Buffered Mult","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e Multiple module with 3X3 output.\u003cbr\u003e \u003cbr\u003e If the input of each channel is not patched, the input signal of the previous channel is internally connected. Therefore, it can also be used as a multiple of 1X9 output.\u003cbr\u003e \u003cbr\u003e Each channel is equipped with LEDs, so you can quickly see the signal.","brand":"WMD","offers":[{"title":"Default Title","offer_id":16168482013253,"sku":"WMDBUFMUL0441","price":22900.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Buffered-Mult-_Black.png?v=1632550349"},{"product_id":"wmd-chimera","title":"WMD Chimera","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cp\u003eCHIMERA is a metallic noise percussion module that combines metallic percussion sound samples with a granular synthesis engine to produce sound. It is also possible to make a persistent sound with a combination of feel switch and Decay knob.\u003cbr\u003e \u003cbr\u003e Chimera provides 11 metallic sound samples, including boxes of tambourines, coins, and effect pedals, and surface controls smoothly transition between them. It is then put into the granular synthesis engine to produce the decay part, and further modulates the sound with effects such as quality reduction, sample rate reduction, and com filter. The Feel switch can also create a different sequence of strengths for each trigger, or extend the decay to create a drone.\u003cbr\u003e \u003cbr\u003e Ideal for metallic industrial textures, hard hi-hats, SE sounds, etc.\u003c\/p\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDEMO\u003c\/h3\u003e\n\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/zNM6Ki9G5n8\" width=\"560\"\u003e\u003c\/iframe\u003e","brand":"WMD","offers":[{"title":"Default Title","offer_id":16168482504773,"sku":"WMDCHI0442","price":56900.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/chimera-black.png?v=1582602871"},{"product_id":"4ms-pod48x-powered","title":"4ms Pod48X (Powered)","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eFEATURES\u003c\/h3\u003e\n\u003cp\u003ePods are a compact, portable, case series for using eurorack modules as desktop units. This version of power is\u003ca href=\"\/en\/products\/4ms-barrel-cable-right-angle\" target=\"main\"\u003eBarrel Cable\u003c\/a\u003e\u003cspan\u003ecan be daisy chained and multiple cases can be driven by a single AC adapter.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Pod is made of anodized aluminum and is very lightweight. The power supply is 1400mA at 12V and is secured enough for this size.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower supply part\u003c\/b\u003eFour 16-pin headers for Eurorack power ribbon cable connections \u003cbr\u003e +12V max 1.4A\u003cbr\u003e-12V max 0.56A\u003cbr\u003e+5V max 0.4A\u003cbr\u003eTwo power jacks for daisy chains\u003cbr\u003eAvailable AC Adapter Output: 15V-20VDC, 2.1mm Center Plus\u003c\/p\u003e\n\u003cbr\u003e \u003cb\u003eSize\u003c\/b\u003e\n\u003cp\u003eOuter width 248.3mm\/ depth 159.5mm \/ height 53mm\u003cbr\u003e Internal dimensions Module depth up to 50.8mm, width 48HP\u003cbr\u003e Weight 0.35kg\u003cbr\u003e \u003cbr\u003e\u003cimg src=\"https:\/\/www.dropbox.com\/s\/7u5qb9qhhnf9wec\/Pod11.jpeg?raw=1\" width=\"600px\"\u003e\u003cbr\u003e\u003cspan\u003eUse of daisy chaining pod series cases. Because of its low height, it is easy to use with other desktop instruments.\u003c\/span\u003e\u003c\/p\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":31440290119737,"sku":"4MSPODPOW48X0487","price":29900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/48x_powered99.jpg?v=1567587254"},{"product_id":"4ms-pod32-powered","title":"4ms Pod32 (Powered)","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eFEATURES\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePods is a case series for using Eurorack modules as compact, portable and desktop units. This version with power supply,\u003c\/span\u003e\u003ca href=\"\/en\/products\/4ms-barrel-cable-right-angle\" target=\"main\"\u003eBarrel cable\u003c\/a\u003e\u003cspan\u003eCan be daisy chained and multiple cases can be driven by one AC adapter.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePods are made of anodized aluminum and are extremely lightweight. The power supply is 700mA at 12V, which is enough for this size.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower supply part\u003c\/b\u003e\u003cspan\u003e4Equipped with four 16-pin headers for connecting the Eurorack power ribbon cable\u003c\/span\u003e \u003cbr\u003e  + 12V max 0.7A\u003cbr\u003e-12V max 0.28A\u003cbr\u003e+ 5V max 0.2A\u003cbr\u003eTwo power jacks for daisy chain\u003cbr\u003eAvailable AC adapter output: 15V-20VDC, 2.1mm center plus\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.dropbox.com\/s\/7u5qb9qhhnf9wec\/Pod11.jpeg?raw=1\" width=\"600px\"\u003e\u003cbr\u003e\u003cspan\u003eAn example of daisy chaining Pod series cases. The low height makes it easy to use with other desktop instruments.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":31440276553785,"sku":"4MSPODPOW0488","price":22900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Pod32-1.jpg?v=1567664049"},{"product_id":"4ms-spherical-wavetable-navigator-swn","title":"4ms Spherical Wavetable Navigator (SWN)","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cspan\u003eSpherical Wavetable Navigator (SWN) is a 6-channel polyphoonic synthesizer voice that makes it easy to create polyphonic melodies, code, and rich texture sound from a slow, morphing drones.SWN\u003c\/span\u003e\u003cem class=\"inExp\"\u003eSix VCO\u003c\/em\u003e\u003cspan\u003ecan be loaded individually to control pitch, volume, and wave control.Nothing.\u003c\/span\u003e\u003cem class=\"inExp\"\u003eSix LFO\u003c\/em\u003e\u003cspan\u003eand it can be used as modulation and enveloping, so it can be used as an envelope,\u003c\/span\u003e\u003cem class=\"inExp\"\u003ePolyphonic sequence sound\u003c\/em\u003e\u003cspan\u003ein the following table.Each channel can be used not only as a simple VCO, but also as a syntheVoice, and it can also trigger six buttons listed on the top, an internal LFO, and a trigger for detecting a V\/Oct pitch change.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEvery knob is a pushable endless knob, and by pressing it, it controls the secondary function written at the caption of a gold back.You can also press the channel button and turn the knob and set the parameters for each channel.Such unified interfaces and LEDs provide a quick and easy way to control many parameters without a menu by displaying pitch or tilde information.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSWN\u003c\/span\u003e\u003cem class=\"inExp\"\u003eWavetable\u003c\/em\u003e\u003cspan\u003eSo, call the obrinator-the waveform.You can also sign different waves for each VCO.The wave table is the form of a virtual sphere, with the distance (Depth) from the center (Depth), Latitude (Latitude), and longitude to specify the position in the sphere, and the waveforms that are in memory are called.The waveform is smooth and morphing, and if you keep the knob again, you will go back to the waveform and make the same morphing as much as possible.The SWN will have a 12-wave table when it is shipped.\u003c\/span\u003e\u003cem class=\"inExp\"\u003eyour own wave tables\u003c\/em\u003e\u003cspan\u003eIt is also easy to create.The wave table can be made from audio and body operations recorded in SWN, and it can be made using a free SphereEdit software running on a Mac, Linux, or Windows operating system.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe output is output with an odd number of channels on the left, and even channels are printed to the right.In the case of monooutput, only the right output is to be patched to mix all channels.\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cspan\u003e* Firmware has been v2.1 since July 2019, and additional features include:For more information, see \"How To Use\".\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003eAdd a CV\/Gate Mode that can be triggered by a gate for each voice\u003c\/li\u003e\n\u003cli\u003eAdd the ability to lock parameters for each channel\u003c\/li\u003e\n\u003cli\u003ethe addition of a single recording function in a waveform\u003c\/li\u003e\n\u003cli\u003eAdding the sphere of export for the sphere\u003c\/li\u003e\n\u003cli\u003eSwitching code in Spread CV modifies the delimiting voltage to correspond to a black key's pitch CV\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- ツールチップ表示のため、商品メイン画像上にマップを作成。--\u003e\u003cmap id=\"interface\" name=\"interface\"\u003e\u003c\/map\u003e\n\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDemos\u003c\/h3\u003e\n\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/M_d0mb_v-hw\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5XfaxlZvnxU\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/U573KPWn7W8\" width=\"560\"\u003e\u003c\/iframe\u003e\n\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eHOW TO USE\u003c\/h3\u003e\n\n\u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eof a button or knob combo operation\u003c\/h4\u003e SWN has many operations due to the combination of buttons and knobs, but it follows the following rules: \u003cul class=\"inExp\"\u003e\n\u003cli\u003eWhen the knob of a parameter is turned around by itself, the parameter is changed in all six Osirators or LFO.If you want to set the VCO or LFO parameters for a particular channel, press the corresponding mute button and manipulate the knob of the parameter.Multi-channel multi-channel buttons are pressed while holding multiple mute buttons\u003c\/li\u003e\n\u003cli\u003eIt is possible to lock each channel so that the voice or LFO is not affected by the knob of the parameter.\u003cb\u003eFirmware v2\u003c\/b\u003e).To make a lock, press \"Fine\" and press the mute button on the channel you want to lock.If you lock it, almost all VCO\/LFO parameters will be fixed for that channel and will not reflect the movement of the knobs.Only 1V\/Oct Jack, Slider and Mute buttons are not locked, but they do the same.Even on a locked channel, you can adjust the individual parameters by holding the mute button.\u003c\/li\u003e\n\u003cli\u003eTo control the parameters of the character in the gold background, hold the knob while holding the knob.\u003c\/li\u003e\n\u003cli\u003eTo control only the small amount of parameters, press Fine and rotate the parameter knob.Valid for each channel operation\u003c\/li\u003e\n\u003cli\u003ePress the Preset button and then press the corresponding button to reset the VCO or LFO parameters.\u003c\/li\u003e\n\u003c\/ul\u003e For more information on combo operations, the description of the following parts:\u003ca href=\"http:\/\/4mscompany.com\/SWN\/manual\/SWN-manual-1.0.pdf\" target=\"main\"\u003emanual\u003c\/a\u003eAlso see the button combo chart on the final page.\u003cbr\u003e   \u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003ePitch control\u003c\/h4\u003e All of the following pitch-related parameters can be set independently or independently for each channel.If you want to set it for each channel, press and hold (or hold) the knob of the corresponding parameters by holding the button corresponding to that channel.\u003cbr\u003e   \u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOctave:\u003c\/strong\u003e the channel pitch is raised in octaves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTranspose (Transpose):\u003c\/strong\u003e cut down the pitch of the channel in half-tone units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine + Transpose:\u003c\/strong\u003e cut down the pitch of the channel in a small unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale for scale:\u003c\/strong\u003e Selects scaled scaled scales: Major, Minor, Chromatic, no Quontaise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpread (Spread):\u003c\/strong\u003e The relative pitch between the channels is released to produce the following code:\u003cbr\u003e\n\u003cbr\u003e 　1: No transposition\u003cbr\u003e 　2-4: Fifths\u003cbr\u003e 　5-7: Major sho\u003cbr\u003e 　8-10: Minor\u003cbr\u003e 　11-13: Major sixths\u003cbr\u003e 　14-16: Major sevenths\u003cbr\u003e 　17: Major League chord\u003cbr\u003e 　18: Major Eleventh chord\u003cbr\u003e 　19-21: Minor-sixths\u003cbr\u003e 　22-24: Minor 's\u003cbr\u003e 　25: Minor chord\u003cbr\u003e 　26: Minor eleventh chord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeynspread (Fine + Spread):\u003c\/strong\u003e Slow down the relative pitch between channels in small units (useful for unison, etc.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1V\/oct Jack:\u003c\/strong\u003e One V\/Oct input for the musical scale control of each channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTranspose Jack (Transpose):\u003c\/strong\u003e Global 1V\/Oct input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpread CV jack:\u003c\/strong\u003e Global spread CV controls for code selection\u003c\/li\u003e\n\u003c\/ul\u003e The exterior rings of the LED also show the pitch state that reflects the Transpose and Spread for each VCO by pressing the Octave knob and pressing Transpose knob.\u003cbr\u003e\n\u003cbr\u003e Press Preset and press Octave to reset the octave, press Preset, and Transpose to reset Transpose and Spread, press Preset and Fine, and then press Transpose to reset Fyne Tuning.\u003cbr\u003e   \u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eLFO\/envelope control\u003c\/h4\u003e All LFO-related parameters can be set independently for channels, or independently for each channel.If you want to set it for each channel, press and hold (or hold) the knob of the corresponding parameters by holding the button corresponding to that channel.\u003cbr\u003e   \u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFO output jack:\u003c\/strong\u003e Each channel has its own LFO\/envelope output jack.It is possible to control the volume of the VCO in the channel by pressing the LFO - \u0026gt; VCA button instead of a patch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFO Speed (LFO Speed):\u003c\/strong\u003e The tempo control for each LFO.It can be synchronized to one or more times (Div\/Mult), such as in the main clock.If you don't want to synchronize, you can use an LFO speed fine control.It also operates in LFO Audio Oral, where speed control is adjusted in half-syllable units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFO tilde (LFO Shape):\u003c\/strong\u003e Select from 25 LFO waveforms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFO Gain:\u003c\/strong\u003e Controls the size of LFOs.It's also useful as an uteneta during self-patch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFO position phase (Phase):\u003c\/strong\u003e Tailor the LFO topology (when the waveform starts)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFO Type Button:\u003c\/strong\u003e Select from triggers, gates, wobsheses (wavy chosen by LFO Shape)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFO CV Jack:\u003c\/strong\u003e LFO speed control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal clock jack:\u003c\/strong\u003e Master-locked Jack for LFO synchronization\u003c\/li\u003e\n\u003c\/ul\u003e You can press a Preset and press LFO Speed to reset the waveform by pressing the Preset and pressing the LFO Shape.Press the Preset and then press both LFO Speed\/Shape to reset the LFO full.You can also toggle LFO Speed and LFO Shape at the same time to toggle between a pattern of 6LFO-aligned patterns and a 60-degree pattern.\u003cbr\u003e   \u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eVolume control\u003c\/h4\u003e The volume of each VCO can be controlled by sliders or mute buttons.The slider state is not stored in the preset, but the mute button state is stored in the preset.\u003cem class=\"inExp\"\u003eLFO→VCA Button\u003c\/em\u003eIt is also possible to create and save a complex polyphoonic sequence.Keyboard mode and LFO→VCA mode by pressing and manipulating mute buttons.\u003cem class=\"inExp\"\u003efor each channel\u003c\/em\u003eIt is configurable. \u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlider:\u003c\/strong\u003e Each channel level can be controlled by a slider.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMute button:\u003c\/strong\u003e Mute can be muted on each channel button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey Buttons:\u003c\/strong\u003e In keyboard mode, in Notre mode, the mute button triggers the envelope of the corresponding channel, and is used to make a sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVCA Input Jack:\u003c\/strong\u003e The jack's role can be switched by the switch to control the level of each channel with the 1V\/oct jack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLFO - \u0026gt; VCA Button:\u003c\/strong\u003e Then, the LFO is patched internally for each VCO's level control.It can also be set for each individual channel.\u003c\/li\u003e\n\u003c\/ul\u003e Also, when you press the LFO→VCA and LFO shape buttons at the same time, the mute button push changes, switching back to note mode, keyboard mode, CV\/Gate mode (firmware v2 and later), and the mute mode of the original mute button. \u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cb\u003eNote mode: \u003c\/b\u003eIn Notre mode, the modulation of the VCA by LFO will no longer be effective, and only VCO with 1V\/Oct signals, Transpose, or Spread will automatically trigger the sound.You can also trigger the sound of each VCO by pressing the mute button corresponding to it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eKeyboard mode: \u003c\/b\u003eMute button triggers each VCO in the same way as in note mode, except that the button is pressed without usthenine and it is an AD envelope, and if the pitch changes, the envelope is not triggered automatically.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCV\/Gate mode (firmware v2 and later): \u003c\/b\u003e In this mode, each VCO can be triggered externally independently.The envelope will reflect the LFO of the corresponding channel.In the gate input for each voice, the jack of Waveform In, Dispertion CV, etc. is used to change its role as follows:Also, the Spread CV jack is the gate input for the entire voice.\u003cbr\u003e\n\u003cbr\u003e\n\u003cimg src=\"https:\/\/www.dropbox.com\/s\/2ivkc9lsk1jgy1u\/swn-cvgate.jpg?raw=1\"\u003e * 1V\/Oct The gate input of a voice that is not cabled to jack will be invalid and will act as the input.For example, it is possible to control Depth with CV when it is not patched 1V\/Oct of the C crater.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eWavetable control\u003c\/h4\u003e All wavy-table-related parameters can be set independently or independently for each channel.If you want to set it for each channel, press the button corresponding to that channel (or multi-select), then turn (or hold) the knob of the parameter.\u003cbr\u003e   \u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrowse is:\u003c\/strong\u003e It scans the wavetable sphere with a zigzag, and recovers the waveforms in the table, morphing morphing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e Moves the Depth coordinates in the wave table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatitude:\u003c\/strong\u003e Move the latitudes to move in the wave table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLongitude (longitude):\u003c\/strong\u003e Move the longitude to moff in the wave table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSphere (Sphere):\u003c\/strong\u003e Select a wave table from a 12 factory wave table, or from 108 Utherwave tables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistributed (Dispersion):\u003c\/strong\u003e Control the distribution in the wave table of the waveform to which each channel calls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistributed Pattern (Dispersion Pattern):\u003c\/strong\u003e Select the pattern for the variance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaves Table Spread (WT Spread):\u003c\/strong\u003e Assigns each channel to a different wave table.\u003c\/li\u003e\n\u003c\/ul\u003e It also resets the wave table by pressing Preset and pressing Depth and Latitude.\u003cbr\u003e   \u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003ePreset\u003c\/h4\u003e You can save all settings except the state slider and the 1Voct\/VCA switch state, and then call it later. \u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eSave Preset (s):\u003c\/strong\u003e Saves the current SWN state.Turn the Preset around to select the desired slot, press the Preset long and turn red, then press Preset again to confirm save.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCall Preset (Load Preset):\u003c\/strong\u003e Save the preset you have saved.Turn the Preset to select the desired slot, press Preset to green, then press Preset again to confirm the call\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Preset clear:\u003c\/strong\u003e Clears a saved preset.Turn the Preset around, select the desired slot, press Preset to continue and turn the LED quickly, then push the Preset again to confirm the clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAndo (Undo Preset), a preset:\u003c\/strong\u003e The preset operation, such as clearing or saving, can be undone only once.Press Fine and press Preset\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eSphere-recording\u003c\/h4\u003e There is a special mode in which a sound is recorded for the creation of spherical wave tables used in SWN, where each control plays a different role.Press the three knobs at the same time: Depth, Latitude, Longitude.The LFO→VCA button is red, the trigger, gate, and the websheper button glees green, and the recording mode is entered.During the recording, pulses from the LFO jack are printed and useful for a variety of synchronization. \u003ch5 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eRecording Method\u003c\/h5\u003e\n\n\u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform In Jack:\u003c\/strong\u003e Enter the audio that you want to weave here.Gains are adjusted automatically.You can also enter a line level sound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecording:\u003c\/strong\u003e Start a sound recording from Waveform in order by pressing the LFO→VCA button.The recording takes approximately 2.5 seconds to build 27 waveforms from an audio segment of this 2.5 seconds.Also,\u003cb\u003eFirmware v2\u003c\/b\u003eYou can also record a single wavy form by pressing Fine and then using LFO→VCA to record.Once you finish the recording, you can turn the Browse slightly to the right, and you can record a single wavy, and then you can record the waveforms while adjusting for each one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring:\u003c\/strong\u003e It is also possible to monitor the input.press the green button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Tone:\u003c\/strong\u003e Test tones are output for tuning.You can press Fine and push the green button to monitor the 86.13Hz test tone.The sound of the sound can be taken into account by matching the audio recording to this pitch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eediting after recording\u003c\/h5\u003e\n\n\u003cul class=\"inExp\"\u003e\n\u003cli\u003eAfter recording, edit the audio to actually store it in the wavetable.Before you save, you can do the following:\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeave Form Shift:\u003c\/strong\u003e Scans a point in the recording material for a tilde selection.Push the central knob off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWebb Form Spread:\u003c\/strong\u003e Adjust the waveform pattern from the recording material. Control where the waveform is picked up from the recorded audio by pressing the Transpose and turning the waveform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeeb Form Stretch:\u003c\/strong\u003eStretch the waveform and adjust the pitch in octaves.Press Octave and rotate the waveform browser-nob.\u003c\/li\u003e\n\u003c\/ul\u003e In addition, you can press the mute button and then turn the waveform in the bottom middle of the waveform to tilt the selected epochs into the waveform.Efect is from the leftmost mute button, \u003cul class=\"inExp\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWave FoldereFect:\u003c\/strong\u003e a control that spaves sound material into a wave folder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBit redaction, Ephecte:\u003c\/strong\u003e a control that fils with a bit redaction, etc., of sound recording material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetall-Raiser Efect:\u003c\/strong\u003e it attaches a metallic redoubled sound to the waveform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLo Path Filter Effects:\u003c\/strong\u003e Sit the recording material into the raw path filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGains\/Nomise Effects:\u003c\/strong\u003e Adjust the Gains of the Recording Materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Effects:\u003c\/strong\u003e you lose the sound of the waveform at the edge of the waveform.\u003c\/li\u003e\n\u003c\/ul\u003e in the following actions.\u003cbr\u003e\n\u003cbr\u003e When you're done editing, save the wavetable sphere to a slot in the user-defined table. Turn the Preset knob, select the slot to record the wavetable, and then long press and hold the Preset knob until it turns red. Then, the save is confirmed by doing preset again.\u003cbr\u003e\n\u003cbr\u003e In addition, when monitoring on in Sphia recording mode and pressing the center knob, the SWN output plays 27 waveforms in the wavetable eight times (a total of about 2.5 seconds). Recording and saving it on a recording device enables you to export and share spheres and edit them on your PC (\u003cb\u003eFirmware v2 or later\u003c\/b\u003ewill be a function of the\u003cbr\u003e\n\u003cbr\u003e For more information on Sphia Recording\u003ca href=\"https:\/\/4msmodular.com\/SWN\/manual\/SWN-CheatSheet-v1.0.pdf\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003eVisit page 3\u003cbr\u003e   \u003ch4 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eFirmware Update\u003c\/h4\u003e SWN allows you to update firmware using audio files. The current firmware version is known in the state of the ring at SWN startup. The inner red ring is the major version, and the outer blue ring is the minor version number.\u003cbr\u003e\n\u003cbr\u003e\n\u003cimg src=\"https:\/\/www.dropbox.com\/s\/jp9nb7amcphdrfe\/swnfirmwareversion.jpg?raw=1\" width=\"500px\"\u003e\u003cbr\u003e Firmware version display example\u003cbr\u003e   \u003cul class=\"inExp\"\u003e\n\u003cli\u003eUnplug all cables connected to the SWN.\u003c\/li\u003e\n\u003cli\u003eTurn off the module\u003c\/li\u003e\n\u003cli\u003eSound can be monitored from right output\u003c\/li\u003e\n\u003cli\u003eSet the volume of the firmware file playback device to 100% and set it to no other sound.\u003c\/li\u003e\n\u003cli\u003ePress and hold the waveform browse knob in the middle of the bottom to turn on the module. After a while, the mute button on The A CH will blink green when the browse knob is turned on.\u003c\/li\u003e\n\u003cli\u003eStart playing the firmware audio file. Slider LED should be animated\u003c\/li\u003e\n\u003cli\u003eIf the update is successful, the LED ring will glow blue or green, and the mute button will flash blue and green. If it fails, the monitoring sound will not be heard, and one of the buttons will turn red. Move the file back to the beginning, check the cable connection, volume, and so on, and then press the mute button on CH A. Blinks green and waits for firmware audio file again, so it starts playing\u003c\/li\u003e\n\u003cli\u003eAfter the update is successful, press the browse knob to restart for normal operation with the new firmware\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"4ms","offers":[{"title":"Default Title","offer_id":29478585860165,"sku":"4MSSPHWAVNAVI0492","price":99900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/swn_frontbd.jpg?v=1567666655"},{"product_id":"4ms-listen-four","title":"4ms Listen Four","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv\u003eListen Four is a 4-input stereo-output mixer.It can also be used as the final output module of the modular system.It is possible to increase the channel through a daisy chain, or to connect Wav Recorder back to the rear. \u003cul class=\"inExp\"\u003e\n\u003cli\u003eTwo types of things (panning) and two stereo (or Mono) inputs.\u003c\/li\u003e\n\u003cli\u003eIt has a headphone output and a main 3.5mm output, and can be adjusted individually.\u003c\/li\u003e\n\u003cli\u003eOutput can be modular, line-level toggling\u003c\/li\u003e\n\u003cli\u003eLow Noise, Low Clostok, Low Bride\u003c\/li\u003e\n\u003cli\u003eIf you don't make a pop sound when you turn it off, you're going to have mute.\u003c\/li\u003e\n\u003cli\u003eMultiple Listen Four or Listen Four Quarters, Wav Recorder and Listen IO are available through the I\/O header pin at the rear.\u003c\/li\u003e\n\u003cli\u003eEach channel and Mix output has an LED for level display.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.dropbox.com\/s\/pg1y77m78tm5c51\/listen-connection.png?raw=1\" width=\"600px\"\u003e\u003cbr\u003e\u003cspan\u003eA chain of modules between modules.Connect the signals from OUTS to INS.Make sure that the cable is facing so that L\/R\/GND is fit.In the example above, the output of LISTEN 4 on the right side of the image is entered in the middle LISTEN 4, and a signal that mixes both can be extracted from the output of the middle LISTEN 4.In addition, the output of the middle LISTEN 4 is connected to the WAV Recorder input, and it is also possible to record the sound of the output.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* For the chain, the 2.54mm interval\u003c\/span\u003e\u003ca href=\"\/en\/products\/4ms-audio-jumper-3pin-cable\" target=\"main\"\u003e3-pin cable\u003c\/a\u003e\u003cspan\u003eis required\u003c\/span\u003e\u003c\/p\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":29478655590469,"sku":"4MSLISFOU0494","price":32900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/listenfour.jpg?v=1567668224"},{"product_id":"4ms-pod26-powered","title":"4ms Pod26 (Powered)","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eFEATURES\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e※Depth of 内寸 can put away this case in only the thin module of one piece of board for 34mm. Please order it after confirming the depth of the module.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePods is compact and is portable and is the case series to use a euro rack module as a desktop unit. This version with a power supply,\u003c\/span\u003e\u003ca href=\"\/en\/products\/4ms-barrel-cable-right-angle\" target=\"main\"\u003eBarrel cable\u003c\/a\u003e\u003cspan\u003eI use を and do daisy chain and can drive plural cases by one AC adapter.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePod is made with Dai Ano's made aluminum and is very lightweight. The power supply is secured for 700mA and this size at 12V enough, too.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower supply part\u003c\/b\u003e\u003cspan\u003e It is equipped with two 16 euro rack power supply ribbon cable 接続用用 pin headers\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12V max 0.7A\u003c\/li\u003e\n\u003cli\u003e-12V max 0.28A\u003c\/li\u003e\n\u003cli\u003e5V max 0.2A\u003c\/li\u003e\n\u003cli\u003eIt carries two power jacks for daisy chain\u003c\/li\u003e\n\u003cli\u003eThe output of the available AC adapter: 15V-20VDC, 2.1mm center plus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSize\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e外寸幅 136.58mm\/ depth 159.5mm\/ 36mm in height\u003c\/li\u003e\n\u003cli\u003e内寸 module up to 34mm in depth, width 26HP\u003c\/li\u003e\n\u003cli\u003e0.19 kg in weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.dropbox.com\/s\/7u5qb9qhhnf9wec\/Pod11.jpeg?raw=1\" width=\"600px\"\u003e\u003cbr\u003e\u003cspan\u003eA use example with daisy chain doing a case of the Pod series. Because height is low, it is easy to use it together with other desktop musical instruments.\u003c\/span\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":31440275767353,"sku":"4MSPODPOW0496","price":20900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/Pod26-1.jpg?v=1567669426"},{"product_id":"4ms-pod40x-powered","title":"4ms Pod40X (Powered)","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eFEATURES\u003c\/h3\u003e\n\u003cp\u003ePods are a compact, portable, case series for using eurorack modules as desktop units. This version of power is\u003ca href=\"\/en\/products\/4ms-barrel-cable-right-angle\" target=\"main\"\u003eBarrel Cable\u003c\/a\u003ecan be daisy chained and multiple cases can be driven by a single AC adapter.\u003cbr\u003e\u003cbr\u003eThe Pod is made of anodized aluminum and is very lightweight. The power supply is 1400mA at 12V and is secured enough for this size.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower supply part\u003c\/b\u003eFour 16-pin headers for Eurorack power ribbon cable connections\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+12V max 1.4A\u003c\/li\u003e\n\u003cli\u003e-12V max 0.56A\u003c\/li\u003e\n\u003cli\u003e+5V max 0.4A\u003c\/li\u003e\n\u003cli\u003eTwo power jacks for daisy chains\u003c\/li\u003e\n\u003cli\u003eAvailable AC Adapter Output: 15V-20VDC, 2.1mm Center Plus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSize\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutside width 208mm\/depth 159.5mm\/height 53mm\u003c\/li\u003e\n\u003cli\u003eInternal dimensions Module depth up to 50.8mm, width 40HP\u003c\/li\u003e\n\u003cli\u003eWeight 0.31kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/www.dropbox.com\/s\/7u5qb9qhhnf9wec\/Pod11.jpeg?raw=1\" width=\"600px\"\u003e\u003cbr\u003e\u003cspan\u003eUse of daisy chaining pod series cases. Because of its low height, it is easy to use with other desktop instruments.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":31440280518713,"sku":"4MSPODPOW40X0498","price":28900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/40x_powered78.jpg?v=1567670470"},{"product_id":"4ms-barrel-cable-right-angle","title":"4ms Barrel Cable-Right Angle","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e  A barrel cable for chaining the power supply of a 4ms Pods series case. Only one pod is connected to the AC adapter, and the other pods are chained with this cable to supply power to all connected Pods cases. The total current consumption of the modules in a series of connected cases should not exceed 3A (different from the exact upper limit).","brand":"4ms","offers":[{"title":"Default Title","offer_id":29478906298437,"sku":"4MSBARCAB-0501","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/b2b-right.jpg?v=1567671666"},{"product_id":"erica-synths-sample-drum","title":"Erica Synths Sample Drum","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003ca href=\"https:\/\/www.ericasynths.lv\/media\/Smaple-Drum-Manual-JP.pdf\" target=\"main\"\u003eJapanese manual (pdf)\u003c\/a\u003eThere is it.\u003cbr\u003e \u003cbr\u003e Sample Drum is a euro rack sampler module of 2 channels. Plain interface and a function, the sound quality with a punch for drums, live performance characteristics are designed by mind. \u003cul class=\"inExp\"\u003e\n\u003cli\u003eThe lei ten sea of around one millisecond\u003c\/li\u003e\n\u003cli\u003eIt is equipped with various effects suitable for real-time sample processing\u003c\/li\u003e\n\u003cli\u003eRecording function of the sample\u003c\/li\u003e\n\u003cli\u003eAnd a manual is automatic, and slice is possible\u003c\/li\u003e\n\u003cli\u003eI can read the cue points in the WAV file\u003c\/li\u003e\n\u003cli\u003eTracking of 1V\/Oct\u003c\/li\u003e\n\u003cli\u003eI input three CV every channel which I can assign\u003c\/li\u003e\n\u003cli\u003eMemory to pre-set\u003c\/li\u003e\n\u003cli\u003ePlain user-friendly interface\u003c\/li\u003e\n\u003cli\u003eThe performance mode deployment\u003c\/li\u003e\n\u003cli\u003eA sample becoming the fact leap reset is in the microSD card of 16GB to be attached\u003c\/li\u003e\n\u003cli\u003eAs for the reproduction file, ビットデプス of the recording in the main body is 12 bits 16 bits 48kHz again\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ツールチップ表示のため、商品メイン画像上にマップを作成。--\u003e\u003cmap id=\"interface\" name=\"interface\"\u003e\n\u003carea coords=\"\" id=\"\" shape=\"rect\"\u003e\n\u003c\/map\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eEXTERNAL LINKS\u003c\/h3\u003e\n\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/v9ZlevfUIxk\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/R-pBbwYWESI\" width=\"560\"\u003e\u003c\/iframe\u003e","brand":"Erica Synths","offers":[{"title":"Default Title","offer_id":29480848851013,"sku":"ERISYNSAMDRUM0517","price":67900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/files\/Sample-Drum.png?v=1686283869"},{"product_id":"expert-sleepers-little-mikey","title":"Expert Sleepers Little Mikey","description":"\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\n\u003cdiv style=\"text-align: left;\"\u003eLittle Mikey is a high gain, clean modular audio input module. Equipped with phantom power of 48V, condenser microphone can be connected (48V switch on left). By using the high impedance option (Hi-Z switch to the left), you can also directly input electric guitars. Other \"-20dB\" switch can be padded to the left with -20dB gain by flipping it to the left. \"Jack \/ XLR\" specifies which of the combo jacks you are using.\u003cbr\u003e\n\u003c\/div\u003e","brand":"Expert Sleepers","offers":[{"title":"Default Title","offer_id":29481072754757,"sku":"EXPSLELITMIKE0521","price":32900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/littlemikey.jpg?v=1567758770"},{"product_id":"alm-busy-squid-salmple","title":"ALM Busy Squid Salmple","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003eSquid Slample is a sampler for 8 channels of audio and CV playback. Designed for real-time sampling and editing. Influenced by early hardware samplers, it uses an easy-to-use, intuitive interface with encoders. Further\u003cem class=\"inExp\"\u003eCV sampling capabilities, CV-controllable many parameters, saving and calling via USB\u003c\/em\u003eSuch as, has been added the essence of the modern modular.\u003cbr\u003e \u003cbr\u003e The included USB stick is equipped with 90 carefully selected samples in advance, including classic drum machine sounds, quirky synth sounds, field recordings and more. Samples by artists such as Mumdance, Solid Blake, Russell Haswell, Lauren Flax, Dave Burraston (NYZ), Sue Zuki, Dungeon Acid, Sasha Lewis and Andrew Duff are also included.\u003cbr\u003e   \u003cul class=\"inExp\"\u003e\n\u003cli\u003e❏ 8 independent channels, 4 DC coupling outputs, and one mixac coupling output\u003c\/li\u003e\n\u003cli\u003e❏ The input jack for sampling can sample CVs and audio, and line-level sampling is possible.\u003c\/li\u003e\n\u003cli\u003e❏ Each channel can be loaded up to a sample of about 11 seconds. Stored in low latency memory at 16-bit, 44.1khz\u003c\/li\u003e\n\u003cli\u003e❏ Each channel has the following parameters and can be adjusted in real time; Bit depth, sampling rate, playback speed (pitch), volume (with simple envelope), crossfade loop, playback direction, start, endpoint, multi-queue group\u003c\/li\u003e\n\u003cli\u003e❏ It has three assignable CV inputs and can be assigned to any of several parameters. 6,7,8 channels plus 1v\/oct input for dedicated pitch control\u003c\/li\u003e\n\u003cli\u003e❏ Sampling initialization and selection of sampling channels can also be automated with patches\u003c\/li\u003e\n\u003cli\u003e❏ Samples can be stored on usb sticks in normal Wav format, and 8 banks can be switched quickly (99 banks can be stored per USB stick)\u003c\/li\u003e\n\u003c\/ul\u003e  \u003c\/div\u003e\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eDemos\u003c\/h3\u003e\n\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/LMElEWu1-x8\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003cbr\u003e \u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yfAr94p9rgE\" width=\"560\"\u003e\u003c\/iframe\u003e","brand":"ALM Busy","offers":[{"title":"Default Title","offer_id":29490585305157,"sku":"ALMBUSSQUSALM0526","price":85900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/ALM022-SQUID-SALMPLER.jpg?v=1570322802"},{"product_id":"expert-sleepers-midi-breakout","title":"Expert Sleepers MIDI Breakout","description":"\n\u003ch3 class=\"clockface-description-title\" style=\"text-align: left;\"\u003eMUSICAL FEATURES\u003c\/h3\u003e\n\n\u003cdiv style=\"text-align: left;\"\u003eA breakout module that can be used as a DIN MIDI connector on the Expert Sleepers Disting mk4 \/ Genral CV \/ FH-2.\u003cbr\u003e  \u003c\/div\u003e","brand":"Expert Sleepers","offers":[{"title":"Default Title","offer_id":29494748446789,"sku":"EXPSLEMIDBREA0532","price":8900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0021\/3965\/2165\/products\/midiBO.jpg?v=1568266525"}],"url":"https:\/\/clockfacemodular.com\/en\/collections\/features.oembed?page=10","provider":"Clockface Modular","version":"1.0","type":"link"}